3.75 Backspacing rubs?

[90seven]

So I stop by 4 Wheel Parts today to order some wheels and the guy says he might not be able to put them on since they might rub. I'll still be running my 30x9.5 for a while till I get the BFGs on Tuesday. Will it rub with that backspacing with 30s? Will it rub when I move up to the 31x10.50?

[88_Pathy]

That is what I have and they work good for me.

[Banshee162]

i have the 31x10.5x15 BFG's on stock rims and they only rub a little when they are turned fully.

[90seven]

What about 31s on 15x8 with 3.75? I was told they WILL NOT install them if they rub even a little and I would have to take them to Discount Tire. If that's the case, them I'm refunding the wheels and getting my set at DT.

[Casey.T]

Almost all the R50 posts about BS state 3.75 BS or less... to prevent rubbing... Someone thats done it will chime in...

[Smithk]

Okay so that is good for the RD50, any problems with the WD21 and 3.75 BS? Because if not I'll order my rims and tires ASAP.

[zonianbrat]

I am running 31x10.50x15 BFG's on Stock chrome steelies and I do not rub at all. Not even at full turn-lock.