TBar

[Guest SuperSon]

Hey guys would the TBar on a 87 fit a 93?

 

If so , what kind of tbar do you think this is? I was thinking a sway away powerbarz but ive seen a few member that has sway away and theyre red.

Edited December 8, 2006 by SuperSon

[sammyb33]

that is a sway bar. (front sway bar)

 

torsion bars, or Tbars are more towards the back of the front diff....they are the bars that go back and connect into a crossmember.....(there are some pics of them around here somewhere.)

 

and for all i know Tbars should swap between all model years.....

[mws]

Check out the green arrow pointing at the TBar....

 

Unfortunately, I can not recognize by sight.

 

Can you get your hands on a set of calipers and measure the diameter? That is the critical thing. A stiffer bar will be larger diameter - and a small change in diameter provides a pretty significant spring rate change. Even a mm larger will make the front suspension quite a bit less compliant/flexy.

[Cuong Nguyen]

the original sway-a-ways were white before the switched to red. It also could be that someone sprayed them white.

[Guest SuperSon]

According to the owner of the truck who just emailed me its an old sway away tbars .Unfortunately it would not work with the pathy.The diameter are the same but the lenght is shorter on the HB by an inch if Im reading the specs correctly.

 

This 87 has a susp lift also and the guy that owns it is willing to part it out if it doesnt sell in 2 more hours.

 

 

 

Nissan Hardbody 4WD 1986-1997 27.5mm 47.437" 1456P

Nissan Pathfinder 4WD 1987-1997 27.5mm 48.437" 1458P

Edited December 8, 2006 by SuperSon

[Casey.T]

I have my old T-Bars from my 91 taking space in my garage..... FREE.....

[Guest SuperSon]

Mine is still good but looking for something beefier

[88pathoffroad]

See if you can buy the front end IFS lift brackets and all if it's gonna be parted out. That's the Trailmaster 4" lift kit and it costs $690 for the kit with no istall and no shocks...I'd buy it from you if you did end up with it!

[Guest SuperSon]

Let me contact the guy and ill get back at ya. I kinda figured that lift has to be a good one looking at the pics.

 

Just in case he ask how many parts is there on that ifs lift kit? Is there some parts in the back too?

[Slick]

here's where you can see a few pics of my TM lift.... just to give you an idea of parts there's a couple more pics on the previous page, and i can take more if you need them

http://s9.photobucket.com/albums/a77/Slick...Pathy/?start=40

[88pathoffroad]

If it's on a pickup the rear parts won't match anyway, cause trucks have leaf springs in the rear. The front parts will all match, though.

[Guest SuperSon]

It is a pathfinder . Im assuming that this is the same trailmaster that maz installed on his pathy righ?

[Guest SuperSon]

Still trying to get a hold of the guy for you 88