Bell Housing Area Threaded Bolts

[BLouisGod]

Well, I have a weird rattle going on in my AT when at a light and idleing. I think its external because if I put the trans in N, the rattle stops. I was under the truck today, and I am missing 2 threaded bolts that connect the bell housing to the back of the engine. I know it doesnt sound like much, but Id assume thats whats causing the vibrations. Anyone know if I am right or the size of these two bolts...Im assuming Nissan used these bolts for a ton of undercarriage parts. thanks!

[94extreme]

pull one of the others out and that's your size.. the rattleing could be all kinds of things.. check your heat shields first.

[88pathoffroad]

The other 8 bolts should keep it from rattling, perhaps your rattle is coming from another source. Check everything underneath, get under there!

 

IIRC, they're 14mm x 1.5 thread pitch. I can doublecheck if you need the info.

[BLouisGod]

Thanks for the bolt size. Id get in there with my hands but they are to big. Its not a heat shield rattle, its dense, and deeper sounding. Ill get those bolts on and see whats going on but there is space between the housing and the engine. thanks again