E_ROCK

Well, I didn't like the way the 8" RF Punch sounded so I pulled one of the 12" Kenwoods I had from another sub box and built a new box for it that goes up over the wheel well. Then carpeted it with tan carpet (actually the back side of some Mossy Oak camo carpet found at Wal-Mart) to match the cargo area. Then wired up another, more powerful amp in the same spot as the old one. Still have to modidy my center caps after the Warn hub install...

A] Back in the day, my buddy had a 4Runner with 3 12's and a 1001D Xtant amp. Long story short, a false floor was made to house the amp and subs so there was still cargo space the length of the rear area but reduced ~10" vertically. You could try something like that. B] I just made this "enclosure" for a spare 8" sub I had lying around. You could try something like this in your rear panels, if they'll hold.

Installed Warn hubs. Now to modify the center caps...

www.radiatorbarn.com I've replaced a Jeep radiator and a Maxima radiator & condensor from these guys and have nothing but positive things to say: fast shipping, direct replacements, all metal, no problems.

Installed my old Pioneer AVIC D3. I had it in my Maxima a couple cars ago and it's been collecting dust ever since. The old Maxima wire harness plugged right in too. I routed the GPS antenna and tapped into pin #26 of the ECM harness above the gas pedal for the VSS wire and everything is working great! It's nice having 90% of my iTunes library again instead of only a couple of burned CDs for my 45 minute rush hour commute. (took this picture before the wires under the console were routed out of view) Also grabbed the 8" sub from my Jeep project and made a 1/4" acrylic mount in rear storage area. Routed the speaker wire to the floor compartment under the cargo mat where the 14 year old Alpine amp (that was also pulled from the corner of a closet) now lives. The mount started out clear. I added some foam tape as a buffer and then pre-drilled the holes before screwing everything together. (the black container with flip lid was removed so more air can move) I thought I had all the power/ground wires and fuses in my old electronics box but I've misplaced them as they weren't with my spare RCA cables. So I had to buy a $28 amp kit from the store I hate the most...Wal-Mart...as Best Buy, Radio Shack, etc. had nothing. Bummer, I thought this system was going to be "free."