-
Posts
90 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by fman
-
-
yep check the fuel pressure regulator vac line on the back end of the plenum mine rotted off and caused the same miss behavior
-
i ended up using 800g wet sandpaper and alot of time that glue was some nasty stuff..
-
welcome
-
wow what a great ride, the old wd trucks still looks great when done right
- 1
-
hi and wellcome
isaac sold or is selling his pathy im not shore how far he got as to a dash they are hard to find for the imports unfort sorry
-
my list from memory
89 2dr dx wd21 dx 5sp man lsd unkown ratio red with grey trim
90 2dr sth man 5sp lsd hg43 black over silver trim
92 wd21 st auto lsd hg46 tk3 trim
93 wd21 st man 5sp hg43 tk3 trim (current dd)
-
howdy and welcome
whats the price of 91 ron up there atm ?
mines close to 95 bucks from empty at 1.40 or so a ltr
a standard v6 tank is 80 lts from memory but there a few long range tank options out there 150 lts or so
-
welcome
-
been after one for ages but wow 50 bucks for postage !!
-
there is this thing and apparently from the factory
- 1
-
memory map for android tablets and phones works well it can use topo maps as well as digital maps. a mob here called hema maps does trips all over the joint doing manual trail/off road way points they are expensive but very accurate and upto date
-
hi yep i got hurricane headers 5 odd years ago the exhaust shop chap said it was tight but easy enough the real issue is how many studs break or are broken getting the cast stuff off from memory there where 4 studs that needed drilling but it was worth it im dismantling the truck atm if u wont any snaps of the steering clearances etc also the oil filter can be tight the easiest solution there was to use the vg33 oil filter from the r50
-
cool feel free to check it out but since my cluster is working illd avoid damaging it atm id did notice niswrek was breaking a 3 door terrano they are dear though
cheers
-
-
nope ive tryied 96 r50 seats you have to mod the mounts or seat will foul on the ecu (only for us right hand drivers though) if you wont newer seat the d22 will slot in or get the old ones recovered i was dissapointed due to the r50 seat being fully adjustable heated etc but the right side slider is built in with seat ajuster and cant swaped over with wd21 sliders the left slide will but then the bolt holes are 2" or so short
-
finally got time work on my new pathy replaced the floppy door mirrors and replaced the orig clarion speakers with some nice sony units. got and installed a yamika short roof basket, installed a uhf antenna. gave it a good vac and put my new bissel little green to work on the headliner, carpets, door cards and seats they came up well. on a sadder note i started wrecking old blue im going to keep most of the trim and accessories etc and send the rest to a u pull it next week
-
she lives jim !!
- 1
-
found this vid does yours look like that ? looks like the lower part is seperate with the glo plug light so thats cool but theres the trans shift lights on the right that mine dose not have
-
hi isaac
welcome aboard
i'm glad parts of old blue may be of use maybe post a few pic of the cluster my main concern is the lights for the glo plugs will be missing you may have rewire
regards
nathan
-
they do make good stuff a mate has a bit of there stuff on his 80 series landcrusier im saving for the wd21 long range fuel tank since we arnt allowed to carry external jerrycans anymore.
-
looks like an awesome pathy and some lovely country very impressed with both. my old girl got defected and is off the road permanently now
-
its properly a wd21 from australia or nz the kits are exy though
http://www.marks4wd.com/transfer-case-adaptors/nissan/navara-pathfinder-1.html
-
That's how I did mine, worked out GREAT!
yep works well
used a ebay harness seams to work well http://www.ebay.com.au/itm/DC-12V-Car-2-H4-HID-Xenon-Conversion-Kit-80A-Relay-Wiring-Harness-30A-Fuse-/151003098909?pt=AU_Car_Parts_Accessories&hash=item23287c6f1d&_uhb=1
i got 2 and put 1 in the parts bin
-
man i dont know my self atm new front and rear break lines with 50mm extra in case of a lift , r50 front seats and console , got a h4 relay loom off ebay fitted that well my jaw droped with that mod lol i couldn't get over the extra light awesome stuff i wish i had done that years ago .... the console works well i had to cut a few mounting points of to fit and take the shifter boot clips off to alow enough travel for the 4wd shifter other than yayyyyyy cup holders . the r50 seats are awesome but they are far from a bolt in replacement mine were short on the rear mounts by 75mm so i made some flat brackets to fix untill my modded frame rails come back from the welder and certified by the dmv. also for the rhd drivers out there the ecu will fowl under the seat(the metal seat pan bulges out alot more than the original seats) so youll either have shift it or drop the ecu brackets. I think it will be worth it though its a much nicer driving position for me at least in the last month or so i also added a rear draw and cargo barrier
Windshield wiper fluid low pressure?
in 90-95 WD21 Pathfinders
Posted
some times you will find the impeller clogs with crap and possibly silicone in your case ;P i found a small bit of pine needle had slowed mine down.