NissanNismoZ
-
Posts
662 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Posts posted by NissanNismoZ
-
-
You know..I can't seem to replicate the problem.. no matter how I drive it it just won't do it again. I mean it shifts into every gear quickly..
I'm going to try letting the EGR sit over night in Carb cleaner tomorrow (have to borrow a friends HUGE channel locks to get that pipe off) and ill see if that fixes the EGR. But the TPS was NOT really adjusted. It seems like it needs it but I never could find the page in the FSM. Thanks TownCivilian for the very specific information. I currently don't own a torque wrench so ill wait before I do a pan drop. Thanks everyone! Ill try adjusting the TPS and seeing if that helps. All I did was change it out and put the new one in the screw 'marks'
Also..what type of transmission fluid is best for these? Thanks!
Circuitry.. UGH that's right! Can anyone tell me what that loom that's on the passenger side valve cover goes to that leads to the tranny?? I forgot to loom it back and it melted against the exhaust (in under 15 minutes of idling) it killed my Meter fuse and left the gauges dead with a very very faint battery light on the dash. I still haven't repaired it as I forgot all about it.
-
Honestly I haven't maintained it.. yet. It was on the list of todo when I get a chance but never got around to it..
The E-AT light only blinks at startup then stays off unless I turn it on.
I do remember the switch was on auto and when the truck had ZERO power the light came on and stayed on and it drove like I had the switch to on. I guess it thought I was towing something?
This is with overdrive on (with the light not on on the dash)
I don't know how to tell if its the torque converter or not..I just know its usually when I want it to downshift from the torque converter being locked.
-
Ugh..if it isn't one thing, its another. I've noticed (I still have the huge power loss from the EGR being screwed up) I have to push it a little harder before hitting a hill..it unlocks the torque converter then ill push harder and it'll slip, ill let off some then it'll shift back into gear..I will say my reverse works great..so I don't think the tranny is shot...yet..
But what could this be..? I checked the fluid and its normal..and I noticed a few air bubbles on the stick ..
I've put so much into the Pathy for the tranny to fail now..
-
Of course this should be followed up with test results of both Short and long term..
All in all you really couldn't ask for a more descriptive write-up. Now we just need to know how well this is going to work and how long..
-
1
-
-
Also..check to make sure your EGR valve is working properly and not sticking.. mine started doing this then it got to the point to where it wouldnt want to accelerate at all!
-
Hmm..alright. Thanks guys! Ill probably go with the 3M if it isn't too expensive
-
Not a problem! You really can't tell it!
Will do, it'll probably be seafoamed as much as possible! Muahaha.
-
Thanks!
Have to say i'm loving how your Pathy has come along.. It looks mean!!I've ran Seafoam through it once..but that was a year ago..i'll probably run some through it again since the lower intake i put on it didnt look as clean as the one i had.. I can say that after all this i'm a pro at removing and re assembling the upper and lower intakes.
Though im pretty sure i dont want to touch that territory again for a WHILE.
I'll try that..Thanks!!
-
1
-
-
Wow..yeah I do mean the little butterfly plate. Mine is probably due for a cleaning, no doubt..
Oh trust me..if i were going to give up, i would have taken the offer to trade it to the 98 Frontier...but nah. I have too much time into pathy to just..trade it.
I will say this morning i cleaned the EGR to the best of my ability and it definitely drives like it used to.
I can actually pass people up hills, an d it has REAL throttle response! My guess is since my timing is so advanced (all the way) its causing it to be still a little sluggish, but honestly im scared to retard it back to where it was...Oh yeah, trust me. I'm a proud Pathy owner.
Haha! That's true! And it's still better looking than any Jeep or Toyota while its running bad!
-
1
-
-
Hmmm..not sure if you mean the throttle body or the intake Plenum..I once cleaned my throttle plate n all around it with Carb cleaner but that's about it..
-
I mean seal wise..maybe one is leaking down past the Injector..though it is possible the injector is sticking open but usually you'd see a code.
Maybe start by checking resistance on all injectors and see if you can find an odd one out?
-
What about the sensor? Won't it throw a code? And what about the egr bpt beside it?
-
I agree, I'd check for a leaky injector.. is it using.any oil at all?
-
Nope. Only sometimes now..but how can I do an egr delete? I don't know what ports to block off
-
Well.. I couldn't clean it all the way as my big.wrench was forgotten at my friends house, but
I removed the two bolts holding itnto the intake and sprayed the crap out of it with Carb cleaner and kept pumping the little speaker like thing on the bottom. Then I did the same for the vacuum port on top of it. Put it all back together and TADA! It now spins out in gravels and accelerates up my.hill.again!
It still bogs some at WOT but I didn't get the chance to clean it thoroughly yet. But it DEFINITELY has 80% more bottom.end than it.did! !
Lets see how it.does when I finish it up tonight.
-
How would I go about cleaning it? I'm not really sure how to go about it..
-
So how is it the ecu knows the egr is messed up.when I see no.connector?
-
Yes, yes you did but I mistook the egr for the egr-bpt..
-
All lines are brand new other than the deteriorating short one under the egr-bpt
That hose is shot O.o
But. I'm going to try Carb cleaner n a lot of air pressure and clean it out and hope for the best
M thanks all!!
-
Yep! I never knew an EGR had that much control
-
So Kyle94 told me to push on the bottom.of the EGR and watch what it does and it died.. so I kept playing with it, getting rougher with it and it finally idles correctly and accelerates better! Not how it used to but I thi thats nk that's what's wrong..
-
Hopped in it to get to work..running late and now i have to drive it like a stick shift..1st gear until 6k 2nd gear until 5k then hope it'll get back up to 55mph. I timed it and its 0-20mph in 15s
Pulled codes (think I did it right)
32 EGR function
14 Vehicle Speed Sensor
Uh..I know the EGR wouldn't.cause all this.....would it...?
-
Ignore that video. Wow. Didn't realize how screwed up that video got after uploading...
The rpm needle does not jump nor does photobucket for android know how to properly upload a video..will upload another later..
-
Swapped the ECM and..nothing.. it runs the same.. so I thought I would update the video.. it may give more.of an. Idea..
I'm lost..hopefully going to try a new fuel filter on the engine bay
New issues...
in The Garage
Posted
And i definitely appreciate it!
So today i went to the junkyard..got a EGR valve off a 95 LE.
Tada! Drives even BETTER than it has been! it still idles low as crap..but i dont know what to do about that.
Anyway, it treated me good until around 30m driving..i stop and get a drink and get back in..and bleeeehhhhh.
I instinctively get out, pump the EGR and tada! good as new.
Why do i have such bad luck with these?!
I stuck the EGR in a tiny bowl nearly full of carb cleaner (it covers the in and out ports) and im going to let it sit overnight.
I will say this EGR actually moves up and down smoothly compared to my old one.
I'm starting to question the EGR-BPT valve..what does it do and how does it affect the running? I've seen some pathy's without them..