Wo0denSp0on

Move it to where? And what the heck is that under the air box?

Alright so I picked up a bumper quite cheap...Figured out a few measurements got some ideas tossed em past my brother and figured out the mounting quite easy. Problem is..The factory windshield washer fluid reservoir and the whatever that is hangin from the air box would be open and exposed if I mounted it as planned. I know a few of you guys have built your own and such..what did you do with these things? My alternatives are A. make do with some brush guard thing with a wench mounted that looks half ass. B. get some metal and fab up some more armor to add to this bumper to cover these things and re-powdercoat. C. relocation? D. Sell the bumper and look for another one a little more suited for my imagination. Help me out fellas! Sincerely, The Sp0on.

Yea i just noticed a clunk from my rear passenger side this past weekend crusing thru the my deer lease. Turns out either me or my brother didnt put the sleeve in the bottom shock bolt hole so the rubber has squished down allowing my shock to rock up and down causing a nasty rattle in rough terrain. At least it was somethin small!

Mine has the rear hatch rattle. Bad enough when I take off from a stop or turn a curve my dome lights come on. My brother is callin my ride "Flash" heh. I shut a rubber mat from work in the hatch and fixed the prob for a little bit. The door open light on the dash also flashes. So some electrical tape may be my fix for a while.

Yea thats AC Lift front coils + SFD from Krypton. The rear is a WJ 6.5in lift coil from Iron Rock Offroad I think is where I got em. I cut just the pig tail out enough to fit around the factory bump stops it sits about 1 1/2 in higher in the rear but with as much as I haul things I plan to leave it.

Ah Ill try to fix that later. I've been workin on uploading these way too long. Yall can do a couple extra clicks it wont hurt ya too much!

And if someone wants to get rid of all the links and just show the images have at it...im not real sure how to make it happen.

The first week I had the pathy. http://imageshack.us/photo/my-images/52/img20101105131018.jpg/ When I rolled it into my brothers shop (Yes he has quite a nice setup.) http://imageshack.us/photo/my-images/543/20110716211228453.jpg/ http://imageshack.us/photo/my-images/707/20110716211208697.jpg/ http://imageshack.us/photo/my-images/97/20110716211151396.jpg/ Parts for the SFD http://imageshack.us/photo/my-images/690/20110716211137443.jpg/ http://imageshack.us/photo/my-images/27/20110720200935441.jpg/ (stock shocks vs 6in WJ coils) During Lift Install. http://imageshack.us/photo/my-images/98/20110718184048147.jpg/ http://imageshack.us/photo/my-images/171/20110719201615259.jpg/ http://imageshack.us/photo/my-images/836/20110719201503634.jpg/ http://imageshack.us/photo/my-images/33/20110719201533265.jpg/ http://imageshack.us/photo/my-images/62/20110719201545860.jpg/ http://imageshack.us/photo/my-images/832/20110719201552794.jpg/ http://imageshack.us/photo/my-images/717/20110730142334789.jpg/ http://imageshack.us/photo/my-images/834/20110730142319875.jpg/ http://imageshack.us/photo/my-images/703/20110731153344114.jpg/ http://imageshack.us/photo/my-images/706/20110731153516812.jpg/ http://imageshack.us/photo/my-images/804/20110923195846698.jpg/ (I made these for my rear strut bar as I drive this truck daily and dont do much flexin. Besides its easy to remove if I wanna!) After finishing up and settin her on the ground. http://imageshack.us/photo/my-images/845/20110731124848958.jpg/ http://imageshack.us/photo/my-images/20/20110731125618289.jpg/ http://imageshack.us/photo/my-images/692/20110731130236156.jpg/ (on stock wheels for fun and I think it shows how much the lift really does) http://imageshack.us/photo/my-images/20/20110731160459838.jpg/ http://imageshack.us/photo/my-images/233/20110731160509245.jpg/ http://imageshack.us/photo/my-images/62/20110731160531166.jpg/ How it sits today. Added some 33x12.50/15 Nitto Trail Grapplers on 15x10 Fuel Revolver wheels and a roof rack. Lights bumper etc comin. http://imageshack.us/photo/my-images/703/20111021151315645.jpg/ http://imageshack.us/photo/my-images/148/20111021151551645.jpg/ (thats an 07 i think Sahara edition jeep behind it lifted on 35's) http://imageshack.us/photo/my-images/834/20111021151600437.jpg/ (close shot of wheel n tire combo) http://imageshack.us/photo/my-images/856/20111022102809255.jpg/ (the last 3 in the woods where She'll be getting the most workload. When we get some rain the roads in and out get pretty rough.) http://imageshack.us/photo/my-images/695/20111022102815513.jpg/ http://imageshack.us/photo/my-images/35/20111022102824170.jpg/ Hope thats good enough for the thread.. Like a good book lotsa pictures! Oh and I thank you guys for all the homework done so that I could build this ride. Edit: I tried to rotate the pictures and they show rotated on my account...not sure why they arent here..

Looks good Rick! I just started my SFD this past weekend and I have the front installed waiting on some OEM parts to finish up the front. (Just some much needed maintenance) And I plan to start on installing the WJ 6.5in Coils from IRO this evening but I can see I will definitely need extended brake lines. At least you told me what shock I need to match it up! Ill get some pics up of my build as soon as I get a chance. Took me longer to get started that planned since the Canada Post was on strike...dang canadians..(no offense Shift220) haha The Krypton parts fell into place nicely!

Thanks Rick. I went ahead and ordered the 6.5 hopefully it works out right. Like you said if its too much i can cut em down. I did order the KF spring mounts along with the rest. Tryin to make it a little easier on myself. Ready to get to work on it!

Much appreciated fellas. I couldnt seem to find any of the 5.5 WJ coils I'll look harder! And yea as far as the name goes its my xbox live gamertag...didnt want to make a username with pathfinder mixed into it somehow..i doubt you see another Wo0denSp0on! ha!

Hey Fellas I am quite new to the forums as this being my first post. I figure this question may have been asked before but I cant seem to find it. I have read all over the SFD Pinned and maybe I missed it. Anyway I have a 98 SE and ordered the KF SFD last wednesday. Lookin to get as much height as I can possibly stretch I wanted to add a set of +2 coils along with it. The front wont be too much of a problem but its getting the rear picked up that has me at a loss. From what I've read is that with just the +4 SFD and WJ +3 coils would work nicely. Aside from having custom coils made how to I get those extra 2 for the rear? Any other snags that you may foresee me to run into with the extra 2in would be greatly appreciated. This is my daily driver and will be using it come hunting season deer/duck and pullin a 17ft war eagle with the occasional weekend romp on the deer lease to see if the jeep boys are as tough as they think . Any help is much appreciated! Ill update with before and after pics as well and hopefully get to be added to the SFD list! Oh and you guys are a lot of help to the ones like me that sit in the background just read and apply your knowledge to our rides. So keep it up!