jwmyers23
-
Posts
228 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by jwmyers23
-
-
replaced the front sway bar bushings. What a improvement.
-
My wife just bought a used 2003 Acura MDX. The driver side seat heater isnt working. Does anybody know anything about mdx's?
-
Went to the scrap yard and pulled a drive shaft out for $40 to have as a spare. I also got some trim peices.
-
That thing is sexy. You sprayed it like that or is that camo fabric?
It's camo fabric held on with some spray adhisive
-
Took the vinyl thing around the dome light off.
My wife hates the snow camo
-
I spent all day Sunday at Rousch Creek.
-
Thanks for all your help.
-
Does anybody know if there is a rebuild kit for the front brakes? My calipers are shot and need something done asap. Stopping is getting a little scarry.
-
Fixed previous owners hack job on the turn signal wires and installed a volt meter. I can't figure out why the horn stopped working though.
-
I love this pic.
-
I played tag with a Saturn today. Bent door, Smashed rocker, and bent rim. Looks like I'm going to the parts yart this weekend.
-
Accel super coil installed. It makes a world of differance with the Nology hot wires Now time for new plugs.
-
The disconnect I made. I took out the swivel bolt, had the cup filled with weld, and drilled a hole for the pin. Works great.
FAIL !!!
It sounded like a great idea too bad it wasn't. The idea behind the swivel bolt is so when the sway bar flexes the bolt can move with it. See where I'm going. The solid pin just snapped the SB links.
-
I cleaned off the MAF. There was a little build up on the sensor itself. I was amazed how much better it ran. I also instaled a set of Nology hot wires. Next week I plan on putting on an Accel super coil.
-
I nominate myself (even if it's a driveway poser shot).
-
Hooked pathy up to neighbors code reader. It says there's a selnoid out in the trans. I forget what it said it was. I also found out that you shouldn't weld on the exhaust with the o2 sensor in (OOPS).
-
Going to look at 94 Pathy for motor and trans to rebuild this winter. Maybe next spring I'll have her running right again.
-
Yesterday I installed new Pro Comp shocks and went for a ride with my neighbor in his 4 runner. We found a mud hole with no bottom. I think we are going back out today.
-
800HP Brabus Mercedes Benz SL65 AMG Black
-
It seems like as soon as I cross one thing off my list I add two more. It's a vicious cycle.
-
Yep I have the same problem. Mines about twice as bad and in more than one spot. I did order new pro comp shocks today from summit should be here Monday or Tuesday
-
Painted the rest of the grill. Had extra paint so I did the tow hook too. Trying to figure out what to replace old shift boot with.
.
-
My father inlaws 1967 MGB. I am the only one who drives it and the only one who fixes it. So in my book it's mine I just keep it at his house.
Traxxas T-maxx with Pathfinder body
Traxxas Stampede set up for sand with paddle tires. I can't wait to try the paddles out in the snow.
-
I stole an idea from nunya and painted my corner lights. I am going to paint the grill too just as soon as I get more paint. I used Duplicolor Perfect match champagne pearl. It is almost the same color.
Name That Manual Hub
in 90-95 WD21 Pathfinders
Posted
I found a hard body at the scrapyard today and it has manual hubs. I'm just not sure what year it is. I think im gonna go pull them off and see what spline they are. I'm keeping my fingers crossed and hoping for 28.