LostNcrRanger

Yeah,It's dumb question time today. How would one get por-15 into the insides of my frame rails? Looking to get some extra rust prevention going. Does anyone have any opinions or input on how i could get this done?

Makes sense to me.

So get some channel mount units?

Hey guys,Was just putting my roof rack back together and noticed the "Weight limit 85lb" sticker. I planned on doing a roof basket. If i switch to another rack setup,such as one made by yakima or thule,does the weight limit remain the same? What's the deal?

I too saw one recently at a honda dealership. it was red,and had been CFCd. I swore under my breath.

I'm gonna get a new one of both just to be on the safe side. *Runs over to the sales board*

Okay so,my buddy got my trans in yesterday and he calls me up saying i have "Kinda reverse,No park,And everything's shifted." Did i strech my shift cable pulling the trans?

The difference has to do with OBDI/II electronics iirc.

i think the inner jackets on my wiring got wet,causing it to short out. but what do i know. if you go to auto zone and have them clear it,see how long it will stay off for. you could always sneak in,clear your code,and run it through inspection that way before the DTC light comes back on.

My frontier used to do the exact same thing. i could never figure out why. has it been submerged lately?

I have no doubt there will be a tremendous monetary gain considering she was driving without a license.

hopefully my money situation will improve next year and i can come too.

This is one of the most beautiful things i've seen on the net. this is how you can tell NPORA is a real community,and not just a forum. i just wish my finances were such that i could have helped with the rebuild.

Yes you did. but what *KIND* of beer was never specified.

i own a ton of molle stuff anyway (TY,Airsoft.) maybe i'll take the idea to my local job shop. it can't cost more then a few bucks to get some cuts made in a piece of sheet metal.

Jesus christ man,I'm glad everyone's okay. some people just don't deserve to have licenses. Then again,she didn't in the first place,so maybe some people shouldn't be allowed within 15 feet of a vehicle. I'm from upstate NY, And I consider myself to be a good driver. i drove I-10 and 60 between my hotel in peoria and my grandmother's in Queen Creek in Late March/Early April and i have never felt more uncomfortable driving in my entire life.

One of my jeeper "associates" (Not to say i associate with jeepers,or maybe i do,and i'm just ashamed to admit it but still) showed me this a while back. MPAC racks They're mostly custom fitted for jeeps,but i'm betting my local job shop could fab one up for my rear liftgate. Anybody seen/heard of these before?

I keep a basic handtool kit,a few tie straps and at least 1qt of each essential variety of "Vehicle blood" in an old M36 musette bag,and have since i got my frontier back in 2005. i also keep a wire coat hangar,A guitar string (High E),a set of jumper cables,a 15x15 tarp,a 500 foot spool of 550,and a flint in my car. I haven't begun building an offroad kit yet,i'm ashamed to admit.

This sounds really dumb,But does anybody know what color wires coming off the alternator would be better or worse?

the junkyard butchered the existing harness.

Any idea how much i'd have to modify it to fit a moonroof equipped car? Care to trade info so that i could?

My tranny went out. no idea how to get it out,so i'm splicing. :\

Does anyone know what this thing is and how i remove it? It's on the right hand side of the transmission.

Thanks.

Okay guys here's the deal- My buddy is getting rid of his 2dr pathy due to frame rot. the transmission shifts better then my own,so i'm considering a swap. is the length of the output shaft and all that mess on the 2dr AT the same dimensions as those on the 4dr?