LostNcrRanger

General purpose: 300w Bestek inverter 6amp phone charger bullet 2 USB cords Baofeng UV-5RE+ Ham radio for emergency use quart of oil Quart of ATF individual first aid kit/trauma kit 2 gallons of potable water gallon of coolant (Not premix) roll of gorilla tape harbor freight mechanics tool kit 5 gallons gasoline can of "Start you bastard" two extra magazines for my sig 229 Box of condoms canteen/cup/lid combo in USGI issue canteen pouch hank of 550 cord 900 lumen streamlight flashlight Shovel Estwing camp axe stanley fat max FUBAR Jumper cables Standard pathfinder bottle jack and tire iron (i've been meaning to replace this.) 4 ratchet straps MOLLE Daypack with camelbak inside Cobra 29LTD chrome edition Transmission funnel Pillow Coyote brown Woobie Isomat Change of clothes It's only excessive till you need it and don't have it.

it's pi day, 3/14, and it's also taco tuesday.

ERMAHGERD DIS IS SO WERNG

I think the pictures may show some of the mistakes he can ultimately sort out in fiberglass. with that said, i would have used something a little bit smaller in stature for the wood. There's a lot of potential to do something really cool sitting right there. Remember your OEM console probably has a few switches in it, and is shaped to fit the tranny tunnel. If you can find a battered stock console in a J/y for a template it would probably help you out a great deal.You can even use 2 part epoxy to glue roving to it. If you do it right, it should look like it belongs there. If you do it wrong...well....It'll be on thereifixedit. I look forward to seeing the rest of this build. So there.

Nope, most cars do it. if it worries you that much, turn it off, then put it in park.

Looks pretty normal. the engine speeds up because it's not under load.

A WD21 would have survived that.

Best writeup ever! Mods should sticky this so it's easy to find.

I'll take it off your hands ty. $8 and some bellybutton lint. Edit: Found a paperclip. Add that. That's my final offer.

Glad to see everyone here made it through.

Would getting something like a hitch haul help you at all? Butchering your pathfinder doesn't seem like a wise idea.

the more i hear the more it seems like it.

I'm more curious about the mounting. I've never really looked at one,so i'm curious as to how much cutting would be involved.

This one is for the folks who've installed,or are planning to install a third brake light. There's no How-To on the subject,and i'd like someone to write one up before i decide whether or not tackle the job. Thanks in advance.

Good point.

So it's a two piece unit? That would help me diagnose better where it broke.

Time for another stupid question thread! Does anyone know offhand if the e-brake cable is different between Disc,and drum brake equipped pathfinders? Thanks in advance.