rosspbig

When i ripped mine off my 97SE one of them was so rusted through that it just buckled and folded in two. they are pieces of crapola and look like hell anyways. take em off and save up for some sliders!

So i have the stock silver reflective tint on my Pathfinder SE, so if for example i put on a black tint would i retain my stock reflective tint or would it be covered up?

I got the Yakima Load warrior on my rig. Got it off ebay for like 250$. came with a cargo net to go over the top.

31s should fit but as said before they may rub a little.

darn if i have to take the whole door panel off to lube the windows im going to be pissed. i guess there is no other way to do it.

Yeah i agree that it is way too big. not something that would be all that great on the trail.

Yeah the ultimate version of those skids proabably weigh a good amount more.

Yeah my windows are unusually slow when rolling up and down. what lube should i buy for them and how do i go about applying it? :confused:

Hey guys, I am installing my new TJM t-17 bull bar in a few weeks and im going to try to take pictures of the whole process as to provide a write up for people who want to do it in the future. i will also post some pics up when i am finished.

Obviously the added weight will affect the fuel effinciency but i think that it will only be minimal.

Yeah that would be about right. if you figure aproxx 70 lbs for the TJM and maybe the same amount for the sliders.........but hey also keep in mind our trucks were not built for speed

I ripped my "pool noodles" off when i found that they had rusted all the way through. I also took them off cause they look like crapola.

Those are friggen sweet! Were those welded on?

Ok cool, i just ordered one from checker auto. thanks

I get that high pitched whine due to a vacum leak i think. severly bent gas tank skid plate. (my fault) windows roll down way too slow sometimes. front seatbelts are slow to retract.

I think mine is a 40 series. Whatever it sounds really nice.

Vengeful, Where can i get a service manual for my truck? (97' pathy SE) -Ross

I have a flowmaster on my 97' and it sounds friggen awesome!! It sounds especialy good when i am in low gear crawling up a hill!!!

I ordered a TJM T-17 bull bar for my 97 pathy, and since my local 4x4 shop is wanting 350$ to install it i have decided to do it myself. any instructions or advice would be very helpful. as i understand it the hard part is taking the factory bumper off so any advice as to how to do this would be awesome!!

that thing is friggen sweet!