big_johnson Posted June 12, 2006 Share Posted June 12, 2006 Well I was trying to wire up my trailer harness using the trial and error method, and now my brake lights don't work. The haynes manual shows the circuit going to a fuse in the fuse box, but I can't find it! There is nothing in there that corresponds to the brake lights (note: there is a "tail" labeled fuse, this corresponds to the regular taillights and interior lights, as I shorted those out as well). So where is this brake light fuse? I really need to know soon! -Chris Link to comment Share on other sites More sharing options...
max_stryker Posted June 12, 2006 Share Posted June 12, 2006 it SHOULD be the same fuse as its the same bulb (dual filiment). Link to comment Share on other sites More sharing options...
big_johnson Posted June 12, 2006 Author Share Posted June 12, 2006 Unfortunately it's not. I shorted out the taillights the other day, but the brake lights still worked. Now, the brake lights aren't working but the taillights are Link to comment Share on other sites More sharing options...
parthy Posted June 12, 2006 Share Posted June 12, 2006 Mine has got nothing written on them nothing written on the lid or in the book had to just keep pulling them out and checking till i found it if some one had a picture of what goes where it would be great :gossip: Link to comment Share on other sites More sharing options...
88pathoffroad Posted June 12, 2006 Share Posted June 12, 2006 On my 89 they're marked "Stop Lamp" and "Clearance/Illumination". Link to comment Share on other sites More sharing options...
NismoSkyZ Posted June 12, 2006 Share Posted June 12, 2006 Did you check the box behind the rear left cargo panel? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now