MaritimeMan Posted May 26, 2005 Share Posted May 26, 2005 1991, SE 4WD I need some one to go and take a gander at the passenger side of the xfer case. I have two sensors, each with two wires comming out of them, for a grand total of 4 harnesses. I have two on the incomming wiring harness, and I need to know how to connect them. The wires off the main harness are yellow and black, the yellow being a female harn, and the black male. Thanks, shout if you need more description. Link to comment Share on other sites More sharing options...
88pathoffroad Posted May 26, 2005 Share Posted May 26, 2005 Allright, I went out and crawled in the gravel for ya...bastard. You owe me. The yellow wire goes to the black/brown wire on the top sensor, and the black/brown wire from your incoming harness goes to the bottom sensor. The two sensors tie together via the black wires, evidently. You're welcome. Link to comment Share on other sites More sharing options...
MaritimeMan Posted May 26, 2005 Author Share Posted May 26, 2005 perfect, thanks Aaron Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now