ProComp #: PCW51-5883

[aceone415]

I have an 2000 QX4 bone stock 16 inch rims NO lift, I really like the ProComp #: PCW51-5883 15x8, with 3.75 BS.   I'm looking into getting these tires 31" X 10.5" X 15LT Goodyear Wrangler Duratrac.  Do I have to lift my rig to have this set up, thanks.    

[gloer]

Fwiw, I had 31x10.5x15 on my 96 SE before lifting, on stock rims. No rubbing. 

 

I just put these on https://www.4wheelparts.com/p/pro-comp-69-series-vintage-15x8-wheel-with-6-on-5-5-bolt-pattern-flat-black-7069-5883/_/R-BKBQ-7069-5883 with 32x11.5x15 and a 2" lift. I've had to do a bit of trimming.

[aceone415]

Thanks yeah reading look like it will work.  

[RainGoat]

Those are good looking steelies for sure!

[RainGoat]

Those are good looking steelies for sure!

[jlduthie]

On 1/23/2021 at 5:13 AM, aceone415 said:

Do I have to lift my rig to have this set up, thanks.

No, but some trimming needed. I have almost the same tire and, post 2”-lift, have those wheels as well. There was some rubbing both pre-lift (stock 98 XE wheels) and post lift. Fender liner and splash guard need trimming. 

[The_Oregonian]

This is very similar to my setup. I have ProComp 252-5883 which is basically the same wheel you are looking at with the addition of fake bead-locks in the same BS/offset. I’m running 31x10.5 as well with a Dobinsons front spring lift (about 1.5+ inches of lift) and they do rub a bit particularly in reverse when turning... I painted the wheels but here is how it looks if it’s helpful at all...