DirtyRhino Posted May 16, 2018 Share Posted May 16, 2018 Did some more wheeling last weekend and gotta say this old pathy held her own with some badass rigs. Here’s a couple shots. Also installed my CB radio as well. Tell me what you guys think. Even had the pleasure of pulling out a stuck Jeep lol. Sent from my iPhone using Tapatalk 4 Link to comment Share on other sites More sharing options...
mjotrainbrain Posted May 17, 2018 Share Posted May 17, 2018 CB install is very clean, I like it! 1 Link to comment Share on other sites More sharing options...
RainGoat Posted June 15, 2018 Share Posted June 15, 2018 Did some more wheeling last weekend and gotta say this old pathy held her own with some badass rigs. Here’s a couple shots. Also installed my CB radio as well. Tell me what you guys think. Even had the pleasure of pulling out a stuck Jeep lol. CB looks good! Lusting after all those empty switch blanks below it. Where did you get the tailgate antenna mount bracket? Link to comment Share on other sites More sharing options...
TowndawgR50 Posted June 19, 2018 Share Posted June 19, 2018 Looking good! Ferrariowner123 also has a full DIN CB that I dig. Im really loving the wide face, easy read display and bright color these units have. Did you have to modify anything to the factory mounts for it to fit? Link to comment Share on other sites More sharing options...
DirtyRhino Posted February 15, 2019 Author Share Posted February 15, 2019 Looking good! Ferrariowner123 also has a full DIN CB that I dig. Im really loving the wide face, easy read display and bright color these units have. Did you have to modify anything to the factory mounts for it to fit?Holy crap I just realized I never replied to this, smh. The factory mounts were untampered, I removed the storage pocket and moved the radio to the bottom and slid the CB on top of it, I did have to trim the the panel on the sides a bit for the CB to actually fit and slide in place Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
DirtyRhino Posted February 15, 2019 Author Share Posted February 15, 2019 CB looks good! Lusting after all those empty switch blanks below it. Where did you get the tailgate antenna mount bracket?Sorry for the extremely late response on this never even realized you asked about the mount lol, I fabbed it myself from a bracket I bought at Home Depot Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
Sjackson2 Posted February 15, 2019 Share Posted February 15, 2019 Looks great man. What lift are you running? 1 Link to comment Share on other sites More sharing options...
DirtyRhino Posted February 15, 2019 Author Share Posted February 15, 2019 Looks great man. What lift are you running?No lift at the moment, that’s next on my list after replacing my steering rack Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Mhand52 Posted February 15, 2019 Share Posted February 15, 2019 1 minute ago, DirtyRhino said: No lift at the moment, that’s next on my list after replacing my steering rack Sent from my iPhone using Tapatalk Oh wow no lift huh. What size tires? Look like 32s Link to comment Share on other sites More sharing options...
DirtyRhino Posted February 15, 2019 Author Share Posted February 15, 2019 Oh wow no lift huh. What size tires? Look like 32sThey’re 31s , had to take the mud flaps off and take a heat gun to the fender liners so it wouldn’t rub Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Mhand52 Posted February 15, 2019 Share Posted February 15, 2019 2 minutes ago, DirtyRhino said: They’re 31s , had to take the mud flaps off and take a heat gun to the fender liners so it wouldn’t rub Sent from my iPhone using Tapatalk Oh gotcha, those are beefy 31s. I feel like I could have almost rolled my 32s stock if I molded some fender areas, but the lift goes on tomorrow 2 Link to comment Share on other sites More sharing options...
DirtyRhino Posted February 15, 2019 Author Share Posted February 15, 2019 Oh gotcha, those are beefy 31s. I feel like I could have almost rolled my 32s stock if I molded some fender areas, but the lift goes on tomorrowYea these coopers are a M/T tire so they’re definitely knobby, I got em for a steal so I grabbed em. Little noisy on the road but awesome on the trails. I like the size of those 32s, makes me wish I went a little bigger Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Mhand52 Posted February 16, 2019 Share Posted February 16, 2019 Without a lift you probably wouldnt have much room for flex in the front. Depends on the tire tho. I was on the fence between sizes and actually came down to which tire I bought. The Falkens only measure 31 with zero load at 38psi. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now