ryjaytay38 Posted October 1, 2016 Share Posted October 1, 2016 I've put new rear trialing arms on and I'm having a hell of a time getting the upper driver side arm off. I can get to it but my 1100lb torque wrench won't move it. I let wd sit on it for an hour and nothing. I can't grind it because of gas tank right there, no room for a hack saw. Could i use a heat gun if I shield the gas tank and filler hose? Any other suggestions to get this damn bolt off would be welcome!! Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted October 1, 2016 Share Posted October 1, 2016 Propane torch. Also WD-40 doesn't do anything for what you need. You need PB blaster. Link to comment Share on other sites More sharing options...
fleurys Posted October 3, 2016 Share Posted October 3, 2016 I used to do mine with a breaker bar...3-4 feet. Was the only way... Link to comment Share on other sites More sharing options...
hawairish Posted October 3, 2016 Share Posted October 3, 2016 I ended up using a floor jack under the end of my breaker bar...worked like a charm. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now