rc_cola_j Posted October 8, 2016 Share Posted October 8, 2016 Should be up around end of october...latest mid-november.... but I am shooting for end of october. Yes!! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
rc_cola_j Posted October 9, 2016 Share Posted October 9, 2016 Let me know when I can place an order. Looking forward. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
fleurys Posted October 27, 2016 Author Share Posted October 27, 2016 We're Almost there !!! Just a few more days.... 7 Link to comment Share on other sites More sharing options...
xterra Posted October 29, 2016 Share Posted October 29, 2016 We're Almost there !!! Just a few more days.... You are such a tease! Link to comment Share on other sites More sharing options...
fleurys Posted October 30, 2016 Author Share Posted October 30, 2016 WE ARE OPEN FOR BUSINESS !! http://sfcreation.com 4 Link to comment Share on other sites More sharing options...
Rangerpathy Posted November 4, 2016 Share Posted November 4, 2016 (edited) Any center and maybe rear skid plates in the plans for the R50?? Edited November 4, 2016 by Rangerpathy Link to comment Share on other sites More sharing options...
fleurys Posted November 4, 2016 Author Share Posted November 4, 2016 Any center and maybe rear skid plates in the plans for the R50?? yes, this is my main focus now. I am restarting the missing link first, then the mid and finally the rear one. S. 1 Link to comment Share on other sites More sharing options...
Gunsmith Posted November 4, 2016 Share Posted November 4, 2016 Very glad to hear that you are back in business, I went looking for your site a few weeks ago and was disappointed when it was gone. I'll be ordering a set of spacers soon and I'm eager to see what you come up with in the future. Link to comment Share on other sites More sharing options...
Rangerpathy Posted November 5, 2016 Share Posted November 5, 2016 (edited) Thx Edited November 5, 2016 by Rangerpathy Link to comment Share on other sites More sharing options...
Rangerpathy Posted November 5, 2016 Share Posted November 5, 2016 yes, this is my main focus now. I am restarting the missing link first, then the mid and finally the rear one. S. Thx. I will pick up a center skid plate for sure when you get to it. Link to comment Share on other sites More sharing options...
fleurys Posted December 19, 2016 Author Share Posted December 19, 2016 R50 Crosslink, Mid Skid and Rear Skid PreSale -Ends December 31st- https://r.tapatalk.com/shareLink?url=http://www.nissanpathfinders.net/forum/index.php?/topic/42686-R50-Crosslink%2C-Mid-Skid-and-Rear-Skid-PreSale--Ends-December-31st-&share_tid=42686&share_fid=45554&share_type=t Envoyé de mon iPhone en utilisant Tapatalk Link to comment Share on other sites More sharing options...
RedPath88 Posted December 19, 2016 Share Posted December 19, 2016 fleurys, perhaps it is time to edit the title of this topic to reflect the updated status? Just say the word and one of the Mod Team will make it so Link to comment Share on other sites More sharing options...
fleurys Posted December 19, 2016 Author Share Posted December 19, 2016 That would be great .. Please go ahead . Thanks Envoyé de mon iPhone en utilisant Tapatalk Link to comment Share on other sites More sharing options...
RedPath88 Posted December 19, 2016 Share Posted December 19, 2016 *Edited Title Link to comment Share on other sites More sharing options...
sleeper00 Posted January 28, 2017 Share Posted January 28, 2017 Great news pal. Ill be ordering soon. Question about the 3rd plate (trans/transfercase skid). Are you producing a 4" subframe drop plate version for that too? Since the trans crossmember will be 4" higher than the crosslink. I dont want to loose the ground clearance at that point. Link to comment Share on other sites More sharing options...
fleurys Posted January 28, 2017 Author Share Posted January 28, 2017 Great news pal. Ill be ordering soon. Question about the 3rd plate (trans/transfercase skid). Are you producing a 4" subframe drop plate version for that too? Since the trans crossmember will be 4" higher than the crosslink. I dont want to loose the ground clearance at that point. For the third plate I have not started anything for those with a 4" sub frame. If you are interested in one, send me a pm or an email at sfcreation<@>yahoo.com "without the brackets" and i'll work something out with you. Steve. Link to comment Share on other sites More sharing options...
sleeper00 Posted January 30, 2017 Share Posted January 30, 2017 Awesome. Im guessing all you would need to do is put a gradual bend from front of the plate to back angling the plate back up to use the trans crossmember brackets. Either way, im sure you could make it work without loosing much clearance. Let me get some extra spending cash together and ill be in touch. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now