kent9571 Posted June 12, 2016 Share Posted June 12, 2016 I found a set of wheels on cl and the guy says they were nissan wheels. He has them on his 2004 toyota tacoma. I read somewhere that the 04 tacomas had a centerbore of 100mm. It said the qx4's centerbore was 106mm. That being said... has anyone seen these wheels before on a nissan? I'd like to have some reassurance before I waste 3 hours. Thanks to anyone that can help Link to comment Share on other sites More sharing options...
Rebelord Posted June 12, 2016 Share Posted June 12, 2016 Look like Frontier wheels. Sent from my SM-G920V using Tapatalk 1 Link to comment Share on other sites More sharing options...
hawairish Posted June 12, 2016 Share Posted June 12, 2016 Flip those numbers...Nissan is 100mm, Toyota 106mm. Those are Nissan wheels. Link to comment Share on other sites More sharing options...
kent9571 Posted June 13, 2016 Author Share Posted June 13, 2016 Look like Frontier wheels. Sent from my SM-G920V using Tapatalk Good call. After a days of research I found out that they are 2004-2007 titan/armada wheels Link to comment Share on other sites More sharing options...
kent9571 Posted June 13, 2016 Author Share Posted June 13, 2016 Flip those numbers...Nissan is 100mm, Toyota 106mm. Those are Nissan wheels.What I saw was that toyota was 100.3 and the r50 is 106. But the stock ugly 3 spokes on my infiniti qx4 look like they're stuck against the hub it's so tight. And I'd hate to do it but it looks like I'm going to have to run spacers to fit the wheels Link to comment Share on other sites More sharing options...
hawairish Posted June 13, 2016 Share Posted June 13, 2016 (edited) 04MY and earlier Frontiers, Xterras, and Pathfinders are 100mm. Titans are 78mm. Toyotas trucks/SUVs are 106mm. If those fit his Tacoma then either: a. He's already running thick wheel spacers and you'll need to, too, to clear the front hubs. b. They've been bored out to >106mm (buyer beware) Edited June 12, 2018 by hawairish 2 Link to comment Share on other sites More sharing options...
kent9571 Posted June 14, 2016 Author Share Posted June 14, 2016 04MY and earlier Frontiers, Xterras, and Pathfinders are 100mm. Titans are 78mm. Toyotas trucks/SUVs are 106mm. If those fit his Tacoma then either: a. He's already running thick wheel spacers and you'll need to, too, to clear the front hubs. b. They've been bored out to >106mm (buyer beware) Hmm. I can't argue with proof! Lol. I'll definitely look more into it Link to comment Share on other sites More sharing options...
kent9571 Posted June 25, 2016 Author Share Posted June 25, 2016 Finally picked em up. They look a hell of a lot better than those flaked tri spokes. I will have to run spacers. The center bore is extremely small compared to the qx4's 1 Link to comment Share on other sites More sharing options...
kent9571 Posted June 25, 2016 Author Share Posted June 25, 2016 Here's the ugly stocks... I haven't measured cb yet but im pretty sure they're 76 or 78mm like you said @hawairish... It's definitely a noticeable difference. I'll measure in the morning. For now, I'll consume some more moonshine and enjoy my weekend Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now