MOOG strut mount bearings after three and a half years...

[clkindred]

...and roughly 30,000 miles with the AC lift and they are still going strong. If KYB's are still not recommended these seem to be a good alternative to OEM Nissan.

 

Here is a pic of one as it came out of the strut mount.

 

 

Here is a pic of it cleaned up a little.

[NovaPath]

Good to know thanks for the post!

[fixinto]

Thanks for the info. =)

[sonyslave]

Thanks!

I went with the Moogs too. Prob only about 15k ago. No problems.

[clkindred]

Thanks everyone! Hopefully MOOG keeps making them like they do, I heard of some other items they outsourced to the cheapest bidder :-(

[FriedEGs]

Just to confirm that is a sealed cartridge bearing inside? I'm assuming ball bearing? (not rollers)

 

[clkindred]

Nope, they are all (for this vehicle, all brands even oem) plastic thrust bushings basically. I think there is a teflon surface in there.