daczone Posted January 11, 2015 Share Posted January 11, 2015 So I get this check engine code... It comes on after driving for a bit. If I hammer the gas pedal for 10-15 seconds it will go away or if I lift off for 10-15 seconds it will go away. I have checked my wiring and everything appears to be connected. I don't think I have a bad sensor because it didn't do this with my old motor, but I may try to change it out. I've also read it's a PITA to replace. Any ideas? Link to comment Share on other sites More sharing options...
adamzan Posted January 11, 2015 Share Posted January 11, 2015 If you have the BPT valve contraption (it would look like 2 egr valves) check to make sure the little rubber hose doesn't have a split in it. If that's not it it may be the egr temp sensor. It doesn't look that hard to change, as long as it comes out easy, lol. Link to comment Share on other sites More sharing options...
daczone Posted January 11, 2015 Author Share Posted January 11, 2015 Ah yes... On the right track. I went to the wrecking yard today and replaced those 3 hoses, but I had them on wrong. I had vacuum going to the EGR valve 100% of the time. So after a quick replacement and test drive it is working perfectly. So hopefully this helps someone else. (Found a set of Warn Hubs on a Pathfinder at U-Pull-It, Too bad I just bought brand new ones). Link to comment Share on other sites More sharing options...
adamzan Posted January 12, 2015 Share Posted January 12, 2015 Well if the are in good shape I could use them! Link to comment Share on other sites More sharing options...
daczone Posted January 12, 2015 Author Share Posted January 12, 2015 They'd probably cost $30 each side. but still a bargain... I paid $180 for my set. Near Portland? http://row52.com/Vehicle/Index/JN8HD17Y4SW006218 On this Red Nissan... Row 30 Link to comment Share on other sites More sharing options...
adamzan Posted January 12, 2015 Share Posted January 12, 2015 Hmm. I could also use those fog lights... Link to comment Share on other sites More sharing options...
daczone Posted January 12, 2015 Author Share Posted January 12, 2015 Every fog light I have seen as the lens cracked. (Mine do)... I was going to replace mine with some LED units. I do like the white lens, I didn't notice if those are still on it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now