Resbum Posted December 29, 2014 Share Posted December 29, 2014 This 95 pathfinder is new to me. It came to me with an automatic to manual transmission swap. Whoever has wrenched on this vehicle in the past should never again be allowed to approach a vehicle with a tool bag in their hand, let alone do something as major as a transmission conversion. That’s a totally different story so I won’t get into it here, but I’ve had to fix and correct sooooo many things since buying it. Here’s the issue I’m posting about. The tachometer always works, it’s nice and smooth in its operation, but it’s constantly running high. At idle it’s above 1,000rpm. At 60mph in 5th gear it runs dead on 3,000rpm and in 4th gear it runs approx. 3475rpm. That spread between 4th and 5th comes out to a .866:1 5th gear, if 4th is 1:1. That ratio combined with the “low” oil filler port leads me to believe the manual transmission came from an 87-95 Pathfinder, or similar. Next, I put the rear axle up on jack stands, and with the both tires off the ground, counted the drive shaft to tire rotations. This came out to 4.6:1, which matches the info plate in the engine compartment. i.e. H46. With the above info figured out, and confirmed, and knowing I’m running 33” tires, I headed to some online rpm calculators and plugged in these values: 60 mph, 1:1 (or .862:1) trans gears, 33” tires, 4.625:1 differential gears The results came out to: 4th gear @ 60mph should be 2825rpm, not 3475rpm 5th gear @ 60mph should be 2435rpm, not 3000rpm Oh, and one more thing, the speedo/odometer are dead nuts on per GPS and some radar boards, which surprised me with the 33” tires I put on it. I just did a 365 mile (per Google maps) road trip and the odometer read 362 miles. One final bit of info, I don’t know if it matters, but the previous owner gave me the manual trans. instrument cluster and ECU that came with the donor transmission for the swap. He said the Pathfinder is still running the original automatic transmission ECU and instrument cluster. He said this doesn't affect anything so he didn't switch them out. After a couple days of searches I've seen a bunch of posts about not working tachos and erratic tachos, but nothing about tachos that work smoothly all the time except for running high. Any help from more knowledgeable members will be greatly appreciated. Resbum Link to comment Share on other sites More sharing options...
95PsychoPathfinder Posted October 2, 2020 Share Posted October 2, 2020 My 95 XE V6 4x4 does 3,250rpm in 4th gear @ 40 mph. That's 5th gear at almost 55 and That's 4th gear at 60... I'm running 235/75r15, same H46 rear axle... I'm redlining when I get on the interstate can't imagine my mpg likes it Link to comment Share on other sites More sharing options...
Mr_Reverse Posted October 3, 2020 Share Posted October 3, 2020 (edited) I can't help but wonder if the tach originally came from a 4 cyl truck. Just because the guy you got the truck from said it was original doesn't mean that it is. Just noticed that this is a 6 year old post.. Edited October 3, 2020 by Mr_Reverse Oops Link to comment Share on other sites More sharing options...
Raw466 Posted October 3, 2020 Share Posted October 3, 2020 I am no expert, just putting my small amount of knowledge out..... Manual Transmissions are coupled with a 4.3 rear end, while Automatic Transmissions are coupled with a 4.6 rear end. Also taking into account SE usually came with 31's (tire size) vs XE 235's (tire size). This affects the speedometer and odometer gearing in the transmission. Remember that we need to understand that each tire brand within the same size will give you a slightly different rotation distance to the measure of a mile (this is where the +/- error variation comes in). So if the conversion was an XE transmission with gearing for 235's and a SE automatic 4.6 rear end ..... these issues can really throw your numbers far off. I am sorry this is all I can add to this conversation, I hope it helps. If not then please just ignore all my efforts. . Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now