Kafike Posted January 7, 2014 Share Posted January 7, 2014 Finally got time to change the hose today. It was wet around the clamps. Changed the hose and clamps. Took me about 20 minutes. Definitely helps to heat the hose up first. I put mine in a bowl of hot water for about 10 minutes first so it would bend easier. Was only 30 degrees out when I did it. Cost me less than $6. No more gas smell :-) Link to comment Share on other sites More sharing options...
smokersteve Posted January 17, 2014 Author Share Posted January 17, 2014 Tightening the clamps worked for about 3 weeks. It's leaking again and worse than before. I'll be getting some new clamps and hose. Where did you guys get the clamps? Are they at any auto parts store? Link to comment Share on other sites More sharing options...
Kafike Posted January 17, 2014 Share Posted January 17, 2014 Yeah, any auto parts store. They're specific for high pressure fuel lines. At least that s what I was told. Only about $2-3 dollars though for a couple Link to comment Share on other sites More sharing options...
adamzan Posted January 18, 2014 Share Posted January 18, 2014 Yea they aren't too expensive and most stores have them. 5/16" FI hose and clamps. Link to comment Share on other sites More sharing options...
smokersteve Posted January 18, 2014 Author Share Posted January 18, 2014 Picked the clamps and hose up at NAPA for $4.64. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now