Anyone have old junk struts laying around?

[linkinpark]

If anyone has an old set of struts they are thinking of throwing away would you mind cutting a few inches off of the top of the rod and mailing them to me?

[Bluewulf73]

if only you'd posted one month earlier...would've even met you or dropped them off somewhere in WA...

[Enjoi408]

I have my stock struts still. but I dont have anything to cut them with.

[patqx4]

I have a pair I just took off this weekend. I can do that if you pay shipping. How long do you need them cut and what's it for out of curiosity?

[shoesandsocks]

strut inserts im guessing most likely doing the koni ones like rocky 2 and me have although i havent installed mine as my kybs are fine.

[linkinpark]

I would like about three to four inches. I am making a strut extension. But making another mod for keeping the cv at a good angle. So I will have more drop but the same tuck.

[shoesandsocks]

hmm im curious to see how this works for u are u planing to change the inserts on the inside and something like this wouldnt work

 

http://www.bits4vits.co.uk/store/vitara-/-x90/strut-spacers-2-25-machined/prod_79.html

[SilverPath]

I still have mine, I am just alittle south west of you. Let me know shipping might be cheaper

[linkinpark]

Something like that. But one problem with that is strength and cv angles. Have a plan for both.

[linkinpark]

Ok so who will ship me some? Ill PayPal you the shipping.