WxChaser Posted February 21, 2013 Share Posted February 21, 2013 Ive recently had a hard time getting out of my pathfinder due to the door handle not opening the door until the 5th or 12th pull. I think the cable is stretched, am I able to remove the door panel and tighten the cable or do I have to replace an entire assembly? Link to comment Share on other sites More sharing options...
adamzan Posted February 21, 2013 Share Posted February 21, 2013 It's a steel rod that is connected with weird looking plastic clips I believe. If you take the panel off you'll see. My old truck was like that and it was some of the plastic parts had worn down. It was pretty cheap to fix. Link to comment Share on other sites More sharing options...
Trogdor636 Posted February 21, 2013 Share Posted February 21, 2013 What adamzan said, or check to make sure the handle itself isn't starting to crack. Link to comment Share on other sites More sharing options...
edicer2 Posted February 21, 2013 Share Posted February 21, 2013 happened to my 92 ....i popped the panel off and bent the rod a bit and it worked good now. Link to comment Share on other sites More sharing options...
WxChaser Posted February 22, 2013 Author Share Posted February 22, 2013 Excellent, I'll add that to my Spring Break worklist! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now