Jump to content
  • Sign In Changes:  You now need to sign in using the email address associated with your account, combined with your current password.  Using your display name and password is no longer supported.

 

  • If you are currently trying to register, are not receiving the validation email, and are using an Outlook, Hotmail or Yahoo domain email address, please change your email address to something other than those (or temporary email providers). These domains are known to have problems delivering emails from the community.

Vibration help!


projekz
 Share

Recommended Posts

I'm looking for a bit of guidance on this issue. I've have a vibration between 45 and 55 MPH. I actually had a vibration before that but I've narrowed it down a bit.

 

When I first bought my truck it needed a bunch of maintenance and some parts replaced so here is what I got done so far:

 

New Springs

New Struts and shocks

New front lower control arms and ball joints

New rear lower control arms

New front sway bar links and bushings

New tires (last week)

Alignment (last week)

 

I ran the truck on the hoist today and the right rear wheel and tire seem to bounce more than the others so I will be switching it with the spare to see if it helps. The vibration is felt in the whole truck and it gets a lot worst when in 4Hi. I can feel it in my seat and in the steering wheel. I checked the wheel bearings and the driveshafts and I can't see anything obvious.

 

Any pointers or suggestions?

Edited by projekz
Link to comment
Share on other sites

One easy test to do is to remove the front drive-shaft. If the vibration goes away, you know it's between the front wheels and the transfer case... I would bet alot of money on the front u-joint...

 

S.

 

look for my post on this..

 

S.

  • Like 1
Link to comment
Share on other sites

I got around to checking the front driveshaft today. The U joint beside the transfer case had a flat spot in it so I went ahead and replaced it. It hasn't changed a thing.

 

I'll try to make some time to check the wheels and rear driveshaft tomorrow or Monday. I'll report back here. I might just go ahead and replace the rear driveshaft u joints since I will take the shaft out anyways.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...