Rebuilding clutch mastercylender

[NWT87PATHY]

Is it possible?

[Trogdor636]

They still sell rebuild kits last I checked. But its so cheap to just buy a master cylinder and less of a headache than rebuilding that's the route I went.

[NWT87PATHY]

Just to make sure. The leak is in the cab. Is it the master cylinder? Or somthing in between the pedel and the cylinder?

[Trogdor636]

The pedal connects directly to the master cylinder, so it sounds like that's what is leaking.

[Alkorahil]

Agreed. it is the cylinder leaking.

For your 1987 Nissan still provides the seal kit or the entire unit.

 

Part Number: 30611-10V27

Description: PISTON KIT-CLUTCH

$16.26 (Nissan list: $34.37)

 

 

The master clutch cylinder defaults to the entire assembly complete with new resevour tank and cap.

Part Number: 30610-59G11

 

Description: CYLNDR ASMY

$83.49 (nissan list: $142.55)

 

 

I found it interesting that the rebuild kit is the same for the 720, D21, D21U, WD21, S130, S110, S12, N10 and Z31

Edited September 27, 2012 by Alkorahil

[NWT87PATHY]

On the Way!

http://www.ebay.ca/itm/New-Clutch-Master-Cylinder-Hardbody-Truck-Nissan-Pathfinder-D21-Pickup-97-1997-/230787607536?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3ANissan|Model%3APathfinder&hash=item35bc036bf0

[NWT87PATHY]

BTW will these Fit??

Or do i need to swap head's and intake?

http://www.ebay.ca/itm/OBX-Racing-Sports-SS-Exhaust-Manifold-Headers-90-95-Nissan-Pathfinder-3-0L-V6-/200817237941?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3ANissan|Model%3APathfinder&hash=item2ec1a3dfb5

[Trogdor636]

BTW will these Fit??

Or do i need to swap head's and intake?

http://www.ebay.ca/itm/OBX-Racing-Sports-SS-Exhaust-Manifold-Headers-90-95-Nissan-Pathfinder-3-0L-V6-/200817237941?pt=Motors_Car_Truck_Parts_Accessories&fits=Make%3ANissan|Model%3APathfinder&hash=item2ec1a3dfb5

 

Yes. Mixed reviews. Do they come with a Y pipe? I seem to recall that was a gripe with somebody.

[NWT87PATHY]

I can make my own Ypipe or make her a true dual w/e. do the multiport jobbys have the same exaust ports and bolt pattern or not??

[silverton]

Yes. But the multiport headers most likely have provisions for EGR.

[NWT87PATHY]

OIC a bolt will take care of that! Does any one know the MSD part numbers for hot ignition?