ahardb0dy Posted June 24, 2012 Share Posted June 24, 2012 Want to know if anyone has a frontier with the xterra style roof rack on it? I am curious as to the width between the tubes. Was thinking the front black air fairing from a frontier may work on the xterra rack I installed on my pathfinder since the frontier has a flat roof. like this one: Thanks Link to comment Share on other sites More sharing options...
nunya Posted June 24, 2012 Share Posted June 24, 2012 Originally Posted by megndave Before I order and pay for a 1st Generation Roof Rack, I am trying to find out the basic dimensions of a 1st Generation Roof Rack to see if one will fit on the roof of a short bed CAP I am thinking about buying. Nissan is a pain in the A**, to get this information from NISSAN I need an applicable vehicle VIN. Like I have a crystal ball to lokint and find a VIN! Can somebody with one of these 1st Generation Roof Racks measure the distance from the front of the forward mounting pad to the rear of the aft mounting pad 51 inches also left to right Front 44 inches left to right rear 42.5 inches and height from roof to top of rail bar. 5 inches Thanks Dave These are the measurements I got.. strange the the rear mounting pads are slightly "in" as opposed to the front. *copied from "clubfrontier.org"* Hope that can help shed some light for you Link to comment Share on other sites More sharing options...
ahardb0dy Posted June 24, 2012 Author Share Posted June 24, 2012 thank you sir, that should work, now if would stop raining for a few minutes I can go out and measure Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now