Help! advice! strut rod bushings

[ACEX2]

I would appreciate some help, I got one of the bolts in. But I cant get the other one in. I will try again tomorrow. Thanks

[ahardb0dy]

try taking the bolt out you got in and putting the other one in first, you may need to use a pry bar or punch or similar to line up the holes.

[The_Magicians_Eye]

It's a pain in the ass. Their is no easy way. Do what ahardb0dy said. I used a big ass flat screw driver to pry it into place while I put the bolt in. Putting a floor jack under the lower arm and trying to raise or lower the suspension arm may help a little too. This is assuming you have the frame supported with jack stands.

[DryBear]

Oh man, I didn't think these bolts would be such a pain to put back in - I was wrestling with getting the dern things back in for at least an hour and still don't have both bolts back in yet. Argh!