Is this TJM bar for a pathfinder

[jessejman]

I recently bought a TJM bumper that isn't going to work well for the truck I have and before I hack it to pieces I am thinking of trying to sell it for the vehicle it was intended. I was a bit hasty in the buying process - a good deal is only a good deal if it works.

 

What I need to know is the distance between the front frame/chassis horns outside to outside.

Bumper dimensions are 74.75" total, 36" o-o on the center hoop, 17.75 i-i on the outside hoops and 10 i-i height on outer loops.

 

 

Pics at link posted below. Any help would be appreciated. Thanks.

jteague(at)mccallie.org

 

 

https://docs.google.com/present/view?id=dk9gwbt_1d3p4z3c8

Edited December 3, 2011 by jessejman

[Pezzy]

So you think you have a TJM for a pathy?

 

I dont have measurements, but I can post pics of mine for reference if that helps at all.

[Pezzy]

How to post a pic: http://www.nissanpathfinders.net/forum/index.php?showtopic=20781

[jessejman]

Pics added. Looks different than yours Pezzy. Middle hoop is very wide. Oh well.. and no help from TJM yet with the serial number.

Edited December 3, 2011 by jessejman

[XPLORx4]

That TJM isn't for the R50. It lacks the "wings" on either side of the bumper that wrap around the front fenders. If it's for a Pathy at all, it's for the WD21.

 

Compare your pics to this photo.

[jessejman]

Xplorer4x4, sweet truck, want to take some measurements of that bar for me?

 

Yeah, I think you're right-looks very similar.

I think the ends just bolt on to the wings of the bar itself and I have no ends for the bumper.

[Pezzy]

I agree, the middle section is too wide. I also think the WD21 tjm is flatter.

 

I think they made bumpers for the 4runner...

[nunya]

That TJM isn't for the R50. It lacks the "wings" on either side of the bumper that wrap around the front fenders.

 

what I noticed lookin at 4runner ones, the "wings" look removable/separate pieces for them 2nd and 3rd gen ones at least... I did find an image that 'looks' similar (without side panels at least mounted) on a 1st gen 4runner though

[XPLORx4]

Xplorer4x4, sweet truck, want to take some measurements of that bar for me?

 

Yeah, I think you're right-looks very similar.

I think the ends just bolt on to the wings of the bar itself and I have no ends for the bumper.

 

What year Pathy are you hoping to put that on? Your profile says you have an '88.

 

I can make some measurements for you when I have a chance. Which measurements do you want?