pakoe Posted November 18, 2011 Share Posted November 18, 2011 Hello, i just buy an used rancho upper control arms for my pathy, but i need replace the bushings and some washers. I'm searching information about this parts but i have not find anything .Anybody can tell me the rancho reference of this uca's?,i'm searching the installation instruccions too. Thank you very much. Link to comment Share on other sites More sharing options...
Precise1 Posted November 19, 2011 Share Posted November 19, 2011 Try PMing beastpath to see who bought his and the instructions... http://www.nissanpathfinders.net/forum/index.php?showtopic=27840&st=0&p=522183&hl="rancho%20uca"&fromsearch=1entry522183 This might help you also. http://www.nissanpathfinders.net/forum/index.php?showtopic=22937&st=0&p=409383&hl="rancho%20uca"&fromsearch=1entry409383 As far as I know, the Rancho UCAs haven't been made for a years and are fairly rare but maybe email someone at Rancho for information?? B Link to comment Share on other sites More sharing options...
nunya Posted November 19, 2011 Share Posted November 19, 2011 Not alot of Rancho arm owners here, they ain't really common. I dint see why an email to Rancho wouldn't bring up at least some part numbers. As for install, I don't see why it wouldnt differ too much from any other UCA. Link to comment Share on other sites More sharing options...
Kingman Posted November 19, 2011 Share Posted November 19, 2011 They mount the same as any other UCA however the frame needs to be drilled if you want to utilize the 4 extra support bolts per UCA. I *think* Silverton put new bushings in the Ranchos I sold him. Maybe try PMing him to see if he has anything to say. Link to comment Share on other sites More sharing options...
silverton Posted November 19, 2011 Share Posted November 19, 2011 Nope, I didn't put new bushings in them, and I don't have them anymore. they are still installed on my old truck AFAIK! Link to comment Share on other sites More sharing options...
pakoe Posted November 21, 2011 Author Share Posted November 21, 2011 Thank you very much for your answers, i have sent two emails to Rancho, but they don't answer me. I'm searching and searching but i only find some photos, there isn't information about this Uca's. But i continue the search.If somebody know some information please send me a PM. Thank you again. Link to comment Share on other sites More sharing options...
Heloflyboy Posted November 23, 2011 Share Posted November 23, 2011 I believe the # you want is RS975.I had to cut shafts they were to long.They were only about $30. dollars from Summit Racing it has been a while though so double check. Link to comment Share on other sites More sharing options...
pakoe Posted November 24, 2011 Author Share Posted November 24, 2011 OK, thak you i will search this reference. Do you know what is the original reference of the kit? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now