Manual hubs

[Meandmy92Pathy]

I just installed manual Warn hubs on the 92 Pathy......got them from Rugged Rocks.......three days and they were here!!!!!! Awesome shipping time!!!!!!!Simple install......However there were two bolts that didn't want to come out.....had to g3et a side grinder to grind the heads off........gonna test the new hubs tomorrow.....more to follow!!!!!!!!!!!!!!!!

[Meandmy92Pathy]

no LSD for me.....looks like Lockright lockers for me.......comments?????? suggestions????? think that the lockright lockers will do the trick!!!!!!!

[Meandmy92Pathy]

[Slashjt]

put some thread locker in the nuts of the hub assembly.

The nuts got loose in a few days!

[unccpathfinder]

i would suggest getting 10.8 or at least 8.8 bolts to replace the studs/nuts with...

[nige]

yes, get a lockright locker, you will like it on the trail

[unccpathfinder]

Lockright lockers r noisey and if this is a DD I would suggest an LSD or selectable locker like an arb

[JamesRich]

no LSD for me.....looks like Lockright lockers for me.......comments?????? suggestions????? think that the lockright lockers will do the trick!!!!!!!

I like my lockright. I go through most mud in 2wd. I drive it to work often with no problems. Coasting around turns keeps it from being too noisy. It does change driveability some. It give you alot more drive line slack so you have to be easy on the clutch when shifting so it doesn't bang. It didn't take me long to adjust though.

James