LawDawg Posted January 28, 2011 Share Posted January 28, 2011 Got the new AC lift kit, tires and wheels on got about 3" total. Should I cut the front of the front fender flare or try to massage it with a heat gun. Anyone ever use heat to move the front in and forward. Thanks OC Link to comment Share on other sites More sharing options...
Northernpathy Posted January 29, 2011 Share Posted January 29, 2011 What size tire are you running? I have 31's and have no rubbing in the fenders or when I had the fender flares on. Link to comment Share on other sites More sharing options...
ahardb0dy Posted January 29, 2011 Share Posted January 29, 2011 When I was running 35's on my 87 Hardbody I trimmed the flares slightly, they are real easy to cut, I just used a utility knife and cut the front edge to look the same as it did stock, be careful if you trim anything as the knife if sharp will go right thru the plastic and you don't want to have an "OOOPS" moment. Link to comment Share on other sites More sharing options...
LawDawg Posted February 9, 2011 Author Share Posted February 9, 2011 Had to remove and modify mud flaps. Tires rub front flare and that will also need modification as far as a "trim job" other then that everything came out great. Tire size was Wild Country's 265/75X16 = 31.6 in diameter. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now