unccpathfinder Posted August 18, 2010 Share Posted August 18, 2010 http://www.gulchesorvpark.com/ Basically I want to go this weekend...sat i'm going to cut the slider off the passenger side and reweld...replace compression rod bushings and hopefully make a day run on sunday... I know theres a trail run section but no1 ever responds...i'd like to get at least one truck to go with me Link to comment Share on other sites More sharing options...
richardekirby Posted August 20, 2010 Share Posted August 20, 2010 http://www.gulchesorvpark.com/ Basically I want to go this weekend...sat i'm going to cut the slider off the passenger side and reweld...replace compression rod bushings and hopefully make a day run on sunday... I know theres a trail run section but no1 ever responds...i'd like to get at least one truck to go with me I'd go if it was a little closer. I know what you mean, I've been having a hard time getting my friends to go on a day run to some places around here. Being 100+ degrees outside does not help my cause. Good luck. Link to comment Share on other sites More sharing options...
GrimGreg Posted August 21, 2010 Share Posted August 21, 2010 http://www.gulchesorvpark.com/ Basically I want to go this weekend...sat i'm going to cut the slider off the passenger side and reweld...replace compression rod bushings and hopefully make a day run on sunday... I know theres a trail run section but no1 ever responds...i'd like to get at least one truck to go with me Post on NOAS, someone might want to go. They cancelled the club run there back in the late winter. Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 21, 2010 Author Share Posted August 21, 2010 well I replaced the compression rod bushings again and found my UBJ's are toast...so it doesnt look like i'll be going...i do want to go sometime soon tho Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 22, 2010 Author Share Posted August 22, 2010 (edited) ....need i say more.... Edited August 22, 2010 by unccpathfinder Link to comment Share on other sites More sharing options...
GrimGreg Posted August 23, 2010 Share Posted August 23, 2010 Amazed that stayed in place. Link to comment Share on other sites More sharing options...
unccpathfinder Posted August 23, 2010 Author Share Posted August 23, 2010 the drivers side wasnt all that much in place and thats how i found out it was toast...i was getting a clunking and then when i changed the compression rod bushings i noticed the tire was all out of place and at first thought my wheel bearings were toast but knew i wasnt hearing them....next place i looked was the UBJ...when i set the truck back down it popped back into the socket...drove it for like 30 more miles to get parts and to get to my buddies place and now she's happy Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now