Door locks don't work

[trenton163]

So a few weeks ago my door locks went out. but what is weird is I can still lock all my doors when I push the switch inside, but I can only lock the drivers door when I use the key. Does anyone know how I can fix this? Thanks

[ahardb0dy]

there is a sensor that clips onto the lock cylinder inside the door shown in my pic below:

 

 

 

 

the sensor in the pic clips onto the lock cylinder than the other half is attached to the end of the lock cylinder so when you turn the key to unlock the door (or doors) the 2 halves line up causing the locks to unlock, the clip that holds the sensor to the lock cylinder break very easily, it's possible yours is broke and is now hanging inside the door so the doors won't unlock when using the key but still work normally using the unlock switch inside

 

on my 94 when I go to unlock the doors with the key I have to turn the key to unlock, than turn it back and than to unlock a second time for all the locks to unlock.

 

It may also be a problem with the door lock module and there is a topic on repairing that on here also

Edited August 16, 2010 by ahardb0dy

[unccpathfinder]

that's probably my problem...mines intermittent...