ChiTownSprty Posted August 14, 2010 Share Posted August 14, 2010 My fan/alternator belt snapped so I'm in the process of changing all 3 belts. I'm pretty new to working on vehicles myself so I was wondering if anyone could provide some helpful info on the best/easiest way to do this. Or maybe someone can send a link to diy guide or something. Anything will help. Thanks! Link to comment Share on other sites More sharing options...
jj big shoe Posted August 15, 2010 Share Posted August 15, 2010 The alt should have a bolt under the alt on curved slotted bracket and a long 10mm bolt that acts as a tensioner. Loosen that bolt, then the long bolt which runs thru a threaded piece that the 1st bolt clamps down. You'll see what I mean once you start on it. It might be easier to get to the long bolt thru the wheel well. The power steering pump has cutouts in the pulley to access the bolt you need to loosen (IIRC, it's toward the bottom). You'll have to bump the starter until it lines up or rotate the crank with a 22mm socket. Once loosened, there's another long tensioner bolt like the alt. The A/C belt idler (top center of the engine) has a bolt in the center of the pulley that you loosen, then loosen the long 10mm bolt running straight down toward the pulley. Link to comment Share on other sites More sharing options...
adamzan Posted August 15, 2010 Share Posted August 15, 2010 I think they are actually 12mm and 14 mm bolts. Other than that it's exactly as jj says. Link to comment Share on other sites More sharing options...
ChiTownSprty Posted August 16, 2010 Author Share Posted August 16, 2010 Thanks for the info. I was able to get this done in a couple of hours on Saturday. Piece of cake! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now