Center con bezel

[jprater88]

Okay i have gotten a few mic. off-road toys(overland navigator for pc from spatial minds, and a unidin 510xl cb) that I want to put in and they all require a power source... I want to run them in parallel with the cigarette /12v power outlet but for some stupid reason I cant get the damn center con bezel off.. I found the two lower screws and the one hidden in the ash tray area now where else is it attached and how the hell do i get it off (sorry for the language its just irritating) so does anyone know how to get it off.. plus i need to fix an issue with how the previous owner put in the radio.. please help

[nunya]

2 in the top under the lip below the vents(above the heater controls) 2 in the bottom, pull out ashtray (do that first actually) and don't pull to hard on the trim so you don't unplug the cig. lighter at a high rate of speed and make the plug shoot back into the dash All phillips screws

Edited August 10, 2010 by nunya

[jprater88]

how do i get the vents out to get to them and thanks for the info about the other two

[nunya]

you don't need to take the vents out, the top bar (between the vents and the heater controls) in the trim is where they are. I'm tryin to find a pic to help aim you

[jprater88]

thanks nunya thats would help alot i want to get atleast my pc in so i can go further off road and more remote trails

[nunya]

 

follow the arrows

[jprater88]

wow i feel like an idiot now thanks nunya you have been a big help

[nunya]

no problem man, sometimes the simple things are the easiest to overlook

[Alkorahil]

Pictures are worth a thousand words!