kcpath Posted July 26, 2010 Share Posted July 26, 2010 When I bought my wrecked 92 pathy $125 it was in bad shape, after a new/used front clip, gutted the frame rot, new calipers, pads, all new front end linkage, rancho shocks, rebuilt engine and reman tranny, new wheels tires, etc, etc. I spent a lot of money restoring this thing and for the door locks and trunk lid not to work its pissin me off. Where do I start troubleshooting this thing? its not the obvious fuse that would make things easy. Link to comment Share on other sites More sharing options...
Kingman Posted July 26, 2010 Share Posted July 26, 2010 There's a control box for the power locks, I think in a 4-door it's in the back behind the paneling? I know in a 2-door it's right next to the back seat on the driver's side. I would check and see if that looks alright, or if there's power going to it. Also, did it come factory with an alarm and a key fob? If so the control unit for that is under the driver's seat. Link to comment Share on other sites More sharing options...
kcpath Posted July 27, 2010 Author Share Posted July 27, 2010 There's a control box for the power locks, I think in a 4-door it's in the back behind the paneling? I know in a 2-door it's right next to the back seat on the driver's side. I would check and see if that looks alright, or if there's power going to it. Also, did it come factory with an alarm and a key fob? If so the control unit for that is under the driver's seat. I tested the door switch and its not that. It did come with a Crimestopper alarm, key-less entry, trunk entry. I've put new battery's in the fob and reset the fob....also contacted Crimestopper and was told the alarm key-less etc would not interfere with locking the doors from the inside switch panel. I also found the 3 wires from the switch panel on the door. how can I trace that back to the contol box. Link to comment Share on other sites More sharing options...
headpeace Posted July 27, 2010 Share Posted July 27, 2010 (edited) possibly this? http://www.q45.org/timers.html could a mod pin this link somewhere? Edited July 27, 2010 by headpeace Link to comment Share on other sites More sharing options...
Precise1 Posted July 27, 2010 Share Posted July 27, 2010 I'm weak with electrical, but assuming most of the wiring is still stock, go to the Garage section and towards the top is a pinned topic, Factory Service Manuals. Go to a link and download the earliest (1994) and there should be full wiring schematics. Also, 5523Pathfinder (Nissan/Infinity mechanic) has a write up about fixing remote entry, but I'm not sure that will answer things... B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now