mrcoolguy6273 Posted June 28, 2010 Share Posted June 28, 2010 could i use a rear axle from one pathfinder for a front axle on another (both 1992)??? Link to comment Share on other sites More sharing options...
ANDY Posted June 28, 2010 Share Posted June 28, 2010 not sure but you should ask the hardcore sas guys. they have there own section but are you planning on doing a SAS? Link to comment Share on other sites More sharing options...
RedPath88 Posted June 28, 2010 Share Posted June 28, 2010 No need to cross post this in several section.. once is enough. If you only want to drive straight then it will work OK... or if you want to spend a lot of time and money converting an H233B to allow steering knuckles and all the associated mods, then yes, you can. Or you can research a SAS options for out trucks here on the board, then ask questions to clear up anything you still do not understand *deleting the other threads and moving this one to the sas/hardcore* Link to comment Share on other sites More sharing options...
MY1PATH Posted June 28, 2010 Share Posted June 28, 2010 *deleting the other threads and moving this one to the sas/hardcore* Thankyou! there has been a trend of overposting lately and it gets annoying cause I wind up looking @ the same thread too many times. and If I replied to one I get confused cause I'm like "Didn't I reply to this?" I aslo can't see what everyone else said on one page cause they all repied to differant ones. Link to comment Share on other sites More sharing options...
mrcoolguy6273 Posted June 28, 2010 Author Share Posted June 28, 2010 No need to cross post this in several section.. once is enough. If you only want to drive straight then it will work OK... or if you want to spend a lot of time and money converting an H233B to allow steering knuckles and all the associated mods, then yes, you can. Or you can research a SAS options for out trucks here on the board, then ask questions to clear up anything you still do not understand *deleting the other threads and moving this one to the sas/hardcore* sorry for posting on other threads i was going to fix it but didn't know how, where would you get these steering knuckles and mods? or would you have to do most it myself thank... Link to comment Share on other sites More sharing options...
RedPath88 Posted June 29, 2010 Share Posted June 29, 2010 Converting an H233B would be a custom job, your going to have to research it. But first I highly recommend that you research the "normal" methods and components used to do a SAS on a Nissan, right here, in this section Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now