Yendor Posted June 27, 2010 Share Posted June 27, 2010 I bought a set of Warn manual hubs off another member here and when I tried to install them, they would not fit on the spindle. I tried both hubs, thinking there would be left and right specific hubs, but still no go. Did I buy hubs that are for a different year Pathfinder? Link to comment Share on other sites More sharing options...
ahardb0dy Posted June 27, 2010 Share Posted June 27, 2010 do you know the part number for the hubs you bought? Link to comment Share on other sites More sharing options...
silverton Posted June 27, 2010 Share Posted June 27, 2010 Count the splines on the Warn hub. There will probably be 27. the 95 model year has 28 Link to comment Share on other sites More sharing options...
tmoore4512 Posted June 27, 2010 Share Posted June 27, 2010 Yep, probably a spline issue... Link to comment Share on other sites More sharing options...
Yendor Posted June 27, 2010 Author Share Posted June 27, 2010 Count the splines on the Warn hub. There will probably be 27. the 95 model year has 28 I just counted the splines. 27. Well, that sucks. It didn't even occur to me to look for that when I bought them. Look for them in the for sale section soon. Link to comment Share on other sites More sharing options...
Mr.510 Posted June 27, 2010 Share Posted June 27, 2010 (edited) I read in a recent thread that you can buy the splined piece as a replacement part from Warn to make them 28 spline. Apparently they also make a 'weak' splined piece that's designed the fail before a CV grenades. The 'weak' version is cheap and disposable: You're supposed to carry spares so you can replace them on the trail should you break one. I see the logic in that fixing a hub on the trail is easier than replacing a CV you probably don't have with you, but I'm not adding any deliberate failure points to my Pathy! Here it is: Warn 27 to 28 spline conversion Edited June 27, 2010 by Mister510 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now