bigred07 Posted March 9, 2010 Share Posted March 9, 2010 (edited) so looking at beast paths truck i starting looking at 4x4parts and ruggedrocks at idler arm braces and steering stabalizers and such, i don't really know much about these mechanics in the first place. after seeing beasts braces and the pictures of the calmini ones on ruggedrocks, i went to go look at mine to see if they looked messed up or anything, and the drivers side one is way bigger and different looking, is it supposed to be like that or is this an aftermarket one? Edited March 9, 2010 by bigred07 Link to comment Share on other sites More sharing options...
Precise1 Posted March 10, 2010 Share Posted March 10, 2010 You must be confusing something, because you only have one idler arm (on the outside passenger frame horn). Are you confusing the pitman arm (off of the steering box) or the tie rods in the centerlink? B Link to comment Share on other sites More sharing options...
nunya Posted March 10, 2010 Share Posted March 10, 2010 Yea... I'm a little confused as to what your looking at. As B said, you only have 1 idler arm (on the passanger side bolted to the frame). Link to comment Share on other sites More sharing options...
bigred07 Posted March 10, 2010 Author Share Posted March 10, 2010 ok well that makes sense to me now. i was just looking where the idler arm is but on the drivers side, like i said i don't know anything about the stuff down there. thanks. Link to comment Share on other sites More sharing options...
Precise1 Posted March 10, 2010 Share Posted March 10, 2010 No worries, that's how you learn... B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now