Rack And Pinion Conversion..?

[Astroc2002]

OK, for a little while I was driving a 1990 Ford F150 2x4 with rack and pinion steering. I like the rack and pinions response when turning the wheel, so my question is can the rack and pinion from an R50 QX4 or Pathfinder work on a WD21 Pathfinder. Granted its not something I'm going to do right away, I just wanted see what options there are available and write them down you know.

[MY1PATH]

well hydro assist has been done with IFS in place so I'm sure R&P can be done with the right amount of fab work.

IMO for a fraction of the cost you could get a HOOHAA CL, run my recent dual stering box mod and replace all your BJ's & tre's and it will feel just as good.

[Kingman]

You can run a rack and pinion set up from a GM full size truck, it ifts almost perfectly into where the factory Nissan steering set up is.

 

 

[JamesRich]

You can run a rack and pinion set up from a GM full size truck, it ifts almost perfectly into where the factory Nissan steering set up is.

More info please?

[Astroc2002]

What or who makes the hoohaa steering box system? Because I tried to do a search on Google on hoohaa steering and just got a bunch of forum listings.

[headpeace]

hoohaa CL Edited February 12, 2010 by headpeace

[Formerly_94PathyMan]

How do you run a full size R&P? Is there a write up somewhere? That would be a cool setup!