Cuong Nguyen Posted January 18, 2010 Share Posted January 18, 2010 I was searching around ebay for some Terrano parts and came up with another company that makes snorkels.... Expensive I might add... http://www.snorkels.com.au/p/530499/snorkel-kit-nissan-navara-d21-terrano-1-pathfinder-pre-1997.html Link to comment Share on other sites More sharing options...
kiwipete Posted January 18, 2010 Share Posted January 18, 2010 This was coverd in another post recently. I have one and posted the faults as I saw them when mine was fitted. At the end of the day you cannot beat getting a steel tube bent by your local exhaust outfit at well under half the cost. I think mine cost me NZ$450 then there was the fitting cost, because my truck was under warranty at the time. I can get a steel tube bent for NZ$170 and fit it myself. Link to comment Share on other sites More sharing options...
Cuong Nguyen Posted January 18, 2010 Author Share Posted January 18, 2010 Shows how much I frequent the site.... haha. I agree with you on the muffler shop snorkel though. Better off fabricating one yourself. Link to comment Share on other sites More sharing options...
Dowser Posted January 18, 2010 Share Posted January 18, 2010 Ya its also already in the PINNED topic for aftermarket products in the general forums section. It was supposed to be option #2 under Snorkels but the link is dead for some reason and Moderators haven't got around to fixing it yet. I posted a separate link on the 2nd Page of the company's home page with a Picture of the snorkel. There are several distributors of their products and they will also sell to you directly. Link to comment Share on other sites More sharing options...
Precise1 Posted January 18, 2010 Share Posted January 18, 2010 This was coverd in another post recently. I have one and posted the faults as I saw them when mine was fitted. At the end of the day you cannot beat getting a steel tube bent by your local exhaust outfit at well under half the cost. I think mine cost me NZ$450 then there was the fitting cost, because my truck was under warranty at the time. I can get a steel tube bent for NZ$170 and fit it myself. Yep, KP helped me see the light with this approch. Just buy the intake piece and go from there... B Link to comment Share on other sites More sharing options...
kiwipete Posted January 19, 2010 Share Posted January 19, 2010 Yep, KP helped me see the light with this approch. Just buy the intake piece and go from there... B Don't forget to post pictures up of the new one too. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now