dunatic Posted December 16, 2009 Share Posted December 16, 2009 i have a 93 pathfinder xe, and im sure you all read my post, about me being a dumb ass and cutting the wires on the ecu, is the wires for the automatic any different than the 5 speed? will they all match up or only the 5 speed one. Link to comment Share on other sites More sharing options...
Kingman Posted December 16, 2009 Share Posted December 16, 2009 My guess is yes it will as there is a separate transmission control unit for the automatics. This has been covered somewhere before... Link to comment Share on other sites More sharing options...
dunatic Posted December 16, 2009 Author Share Posted December 16, 2009 My guess is yes it will as there is a separate transmission control unit for the automatics. This has been covered somewhere before... thanks! i just didnt know there is a few different colored wires. Link to comment Share on other sites More sharing options...
Precise1 Posted December 16, 2009 Share Posted December 16, 2009 I do not know about wire colors, but a manual tranny ECU can not be used in a truck with an auto tranny, but an auto tranny ECU can be used in manual tranny truck. This is because the auto tranny ECU talks to the AT controler. This would indicate that there are additional wires, but again, I have no idea about the colors. Are you not just reinstalling the ECU you cut out?? B Link to comment Share on other sites More sharing options...
GrimGreg Posted December 16, 2009 Share Posted December 16, 2009 I can tell you this wire is what goes to the AT ECU from the main ECU: (Looked into ECU relocation, ended up tupper waring it.) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now