MaRgE Posted November 22, 2009 Share Posted November 22, 2009 (edited) well you now i have installed front differential or what it calls, so when i trying to turn on 4WD and i put my gear in 4H nothing happens, car drives but still in 2WD what to do ? i trued 4L too, low range works but still 2WD, does my car has hubs or something like that ? it is a 1994 years old Nissan Terrano 1 (WD21) 2.4 Edited November 22, 2009 by MaRgE Link to comment Share on other sites More sharing options...
OldSlowReliable Posted November 22, 2009 Share Posted November 22, 2009 check to see if the front drive shaft is turning...may help to get someone else to look while you drive or vise versa Link to comment Share on other sites More sharing options...
MaRgE Posted November 22, 2009 Author Share Posted November 22, 2009 ok i will check it if turning then what ? Link to comment Share on other sites More sharing options...
Terrano1992 Posted November 22, 2009 Share Posted November 22, 2009 If both shafts turning on 4H/4L - check your hubs for possible damages and/or incorrect assembly. By the way, last WD21 with 2.4l engine (Z24i) was produced in 1992, not 1994... Link to comment Share on other sites More sharing options...
MaRgE Posted November 22, 2009 Author Share Posted November 22, 2009 yes i now about 1992 but it is 1994 years old, checked with win number, it is made for Europe, and about hubs how to check ? it has hubs ? i dont need to turn on hubs? this is my car, look at wheels how to turn on hubs ? WTF wheels are those maybe the habs are Turned of ? Link to comment Share on other sites More sharing options...
Terrano1992 Posted November 22, 2009 Share Posted November 22, 2009 (edited) yes i now about 1992 but it is 1994 years old, checked with win number, it is made for Europe, However, last 3-door body and last Z24i engine was produced at 1992. So, you have a truck with replaced frame (VIN stamped at frame), and "frame donor" was 1994. Nothing bad, but some parts on 1987..92 and 93..95 are not interchangeable (for example, steering centerlink). and about hubs how to check ? it has hubs ? i dont need to turn on hubs? this is my car, look at wheels how to turn on hubs ? WTF wheels are those maybe the habs are Turned of ? Your wheel caps hides hubs... They are automatic in most cases, but maybe previous owner install manual hubs? Look here first. Very good auto hub description with photos. Edited November 22, 2009 by Terrano1992 Link to comment Share on other sites More sharing options...
MaRgE Posted November 22, 2009 Author Share Posted November 22, 2009 (edited) ok i will check that topick and than look at my hubs i will took of one of that wheels if those automatic hubs are broken, then i will change it i need 4WD yes about previous owner and manual hubs,maybe i dont now, i have to took of what wheel and what well cap to see what is there Edited November 22, 2009 by MaRgE Link to comment Share on other sites More sharing options...
MaRgE Posted November 23, 2009 Author Share Posted November 23, 2009 (edited) What king of Hubs are those ? it this automatic ? Edited November 23, 2009 by MaRgE Link to comment Share on other sites More sharing options...
Terrano1992 Posted November 23, 2009 Share Posted November 23, 2009 Automatic, of course. And i can clearly see a broken wheel stud... Replace it as soon as possible. Link to comment Share on other sites More sharing options...
MaRgE Posted November 23, 2009 Author Share Posted November 23, 2009 what is wheel stud ? that hub ? it means that hub is broken and i have to Replace that yes? Tomorrow i Think i will go to do some Service and see what they say, after that i will buy new Hubs and replace them Hope it costs not much money Link to comment Share on other sites More sharing options...
Precise1 Posted November 24, 2009 Share Posted November 24, 2009 The rusted stump at 4 o'clock is the broken wheel stud. It means you are only holding the wheel on with 5 lug nuts. I suggest you disassemble the hub yourself as per the topic terrano1992 linked to see if anything is broken, clean and properly lube them, reinstall and see if they work. The hubs may simply not work if they are rusted inside, packed with grease or have never been serviced. There is no evidence yet that anything is broken. B Link to comment Share on other sites More sharing options...
nunya Posted November 24, 2009 Share Posted November 24, 2009 Not to add to your confusion but that brake rotor looks a bit grooved up. How much of those brake pads are left too? Kind of looks thin on the pad I see... Link to comment Share on other sites More sharing options...
MaRgE Posted November 24, 2009 Author Share Posted November 24, 2009 dont now about brakes today i was at service center, left hub is dead so i have to change it, new one is for 90USD i have to bought it and then install Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now