Power doorlock

[PATHRIDER]

Trying to look for the power doorlock main control box on my pathy but not having any luck.. I tried replacing the actuators on the drivers side door with another one that I know works and that wasnt it...Any ideas guys why the doorlock quit working? Cant operate it from the switch either..all fuses are ok..any help is greaTLY appreciated

 

factory alarm still arms and disarms

[edicer2]

pretty sure i read some where a soder connection fails inside the box and it causes them to not work or lock and unlock when they want to. I dont know where the box is but im sure someone will chime in and mention that. You cna look at the box when u find itand see if u see any broken soder points if not you might have to replace it and i would recommend just getting one from someone who is parting their truck out.

[PATHRIDER]

pretty sure i read some where a soder connection fails inside the box and it causes them to not work or lock and unlock when they want to. I dont know where the box is but im sure someone will chime in and mention that. You cna look at the box when u find itand see if u see any broken soder points if not you might have to replace it and i would recommend just getting one from someone who is parting their truck out.

If I can only locate it im pulling one out from my wifes truck for now..Thanks edicer...Im still trying to look for it...im thinking its in the kick panel

[dhardison]

This link should help it's located behind the left side trim panel in the cargo area.

 

http://www.q45.org/timers.html

[PATHRIDER]

This link should help it's located behind the left side trim panel in the cargo area.

 

http://www.q45.org/timers.html

thanks bud..ill check it on the rear q panel

[PATHRIDER]

thanks bud..ill check it on the rear q panel

got if fixed...finally my doorlocks working again.. I might try resoldering the old timer unit ..Thanks dhardison