Door Locks - the plastic bits...

[Harvey]

Hi All,

 

I ordered some new door locks for my Pathy but I've noticed a couple of things...

 

1 - I need some plastic bits as it's the plastic bits of the door clock inside the door that closes next to the latch on the B pillar thats broken. So my question is - where do i get these plastic bits from?

 

2 - whilst I can figure out how to take of the cath that holds the lock barrell on the door, how do I actually detach the barrell from the rest of the mechanism?

 

thanks all!

Harv.

[Tungsten]

For the plastic bits, either make your own contraption thats similar to the plastic bits out of some copper wire, or go see the dealer.

[nunya]

Go to a junkyard with an empty pocket, leave with a couple plastic bits

[GrimGreg]

Depending on which bit, you can get a pack of generic ones for like $2 at the part store, I did that for a broken piece on my 93. When I had to replace parts on my 88, I used Nunya's method.

[beckylynn420]

I know that O'Reilly has a pack of generic ones different sizes and such....only a couple bucks...you can try there. By chance is it the passenger side door? Just curious cause both of these ones we have neither passenger side door lock works properly....darn things!

 

 

Thanks

BH