ronin152 Posted April 6, 2009 Share Posted April 6, 2009 (edited) What is the hub size on a 2003 Nissan Pathfinder? Just bought new wheels and the hub size is 108mm please tell me it is small than that???? Edited April 6, 2009 by ronin152 Link to comment Share on other sites More sharing options...
Simon Posted April 6, 2009 Share Posted April 6, 2009 100mm Link to comment Share on other sites More sharing options...
alexrex20 Posted April 6, 2009 Share Posted April 6, 2009 good thing you bought the wheels before measuring. Link to comment Share on other sites More sharing options...
ronin152 Posted April 6, 2009 Author Share Posted April 6, 2009 Well I orginally purchased some from 4hweelparts which had a hub bore that was big enough. The wheels posted above are basically the same wheels so I figured they would have the same hub bore..... Link to comment Share on other sites More sharing options...
ronin152 Posted April 6, 2009 Author Share Posted April 6, 2009 Simon are you positive on that? Link to comment Share on other sites More sharing options...
alexrex20 Posted April 6, 2009 Share Posted April 6, 2009 those wheels will definitely fit, if that is indeed a 6x5.5 bolt circle. Link to comment Share on other sites More sharing options...
ronin152 Posted April 6, 2009 Author Share Posted April 6, 2009 Yeah the wheel is a 16x8 6x5.5 4.0 BS 108mm hub bore Link to comment Share on other sites More sharing options...
alexrex20 Posted April 6, 2009 Share Posted April 6, 2009 you're good to go! i can tell by the pic alone that those wheels will clear your hubs. generally speaking, all aftermarket off road wheels (like those streetlocks) is going to have a large center opening to clear manual hubs. what wheels are those, btw? Link to comment Share on other sites More sharing options...
ronin152 Posted April 6, 2009 Author Share Posted April 6, 2009 Eagle Alloy Series 185. $115 a piece. They are really light! I think like 23 or 25 pounds a piece. Link to comment Share on other sites More sharing options...
180sx Posted April 7, 2009 Share Posted April 7, 2009 those are some nice ass wheels...mind if i copy you and get a set? Link to comment Share on other sites More sharing options...
ronin152 Posted April 7, 2009 Author Share Posted April 7, 2009 Not at all. They are awesome sooo light. I am not that fond of the machined edge but it was the best I could find. I guess I could always paint it. Link to comment Share on other sites More sharing options...
02silverpathy Posted April 7, 2009 Share Posted April 7, 2009 Nice wheel indeed, pics after installation please!! Link to comment Share on other sites More sharing options...
Simon Posted April 7, 2009 Share Posted April 7, 2009 Simon are you positive on that? Yep. THe R50's use the same aftermarket Warn Hub as the WD21's. They're sized to fit inside stock wheels. Stock wheels have a 100mm bore. Link to comment Share on other sites More sharing options...
ronin152 Posted April 8, 2009 Author Share Posted April 8, 2009 Thanks for the help. Now I am looking at ordering som center caps. There are ones that are like 3 inches tall and then there are ones that are like 4.5in tall. I would like the shorter ones but noticed that the Pathy 17 in LE Spoked wheels have a large center cap height. Is there anything from stopping me from getting the shorter cap? Do I also need to get new lug nuts? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now