bitemedoughboy.com Posted February 10, 2009 Share Posted February 10, 2009 i just picked up some universal poly bump stops, i'm going to put them in place of the missing bump stops that limit the down travel. does anybody know how short i need to trim them? i dont have the originals to measure from. the CV's bind and full droop and that makes for some scary driving ion the slick stuff. Link to comment Share on other sites More sharing options...
GrimGreg Posted February 10, 2009 Share Posted February 10, 2009 I have ultra-low profiles on mine, they are about 1/4"thick at the center, stock were about 3/4" thick at the center IIRC. Link to comment Share on other sites More sharing options...
bitemedoughboy.com Posted February 10, 2009 Author Share Posted February 10, 2009 I have ultra-low profiles on mine, they are about 1/4"thick at the center, stock were about 3/4" thick at the center IIRC. thanks Link to comment Share on other sites More sharing options...
Precise1 Posted February 10, 2009 Share Posted February 10, 2009 I'll look at my stock ones tomorrow if you like. It's dark and 40 degrees right now, so you have to wait a day... B Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now