Earljam Posted November 4, 2008 Share Posted November 4, 2008 Rocky-road.com claims to offer a 1.75 OME (Old Man Emu) suspension lift for 2005+ Nissan Pathfinders. I have not seen this offered by any other site incuding ARBUSA.com. I sent an email to ARB asking if they make such a lift and have not received any response. Does anybody have any additional information on this lift or know of any lifts for the 2005+ Pathfinder other then the $1,600 5" Calmini? Ideally I would like to find something in the 3" range Link to comment Share on other sites More sharing options...
medici Posted November 5, 2008 Share Posted November 5, 2008 Indeed, there is an OME lift for the R51. Several guys on thenissanpath.com have installed it successfully. The major obstacles are a.) fitting the springs on the coilover shocks and b.) getting the alignment within factory spec afterwards. Unfortunately, it seems people have only been getting between 1.5 and 1.75" of lift, which in my mind isn't enough to justify the effort and cost. As for the alternative, Calmini, that $1,600 is just for the drop-down parts; you're still looking at replacing the OEM springs and shocks when you're done. And I'm not sure I want to drive a 2005+ Pathfinder with 5" lift unless I widen the stance a bit. I am looking at putting together my own lift using Rancho shocks, OME springs and Total Chaos UCA's. I'm hoping to get 2-2.5" lift plus gain 2" travel front and rear for about the same price as the Calmini kit. My goal is to mount 33" tires, which in combination with the lift will give me a total of 4-4.5" elevation, 2" extra clearance and 2" extra wheel travel. Link to comment Share on other sites More sharing options...
MIKEY14 Posted November 7, 2008 Share Posted November 7, 2008 Indeed, there is an OME lift for the R51. Several guys on thenissanpath.com have installed it successfully. The major obstacles are a.) fitting the springs on the coilover shocks and b.) getting the alignment within factory spec afterwards. Unfortunately, it seems people have only been getting between 1.5 and 1.75" of lift, which in my mind isn't enough to justify the effort and cost. As for the alternative, Calmini, that $1,600 is just for the drop-down parts; you're still looking at replacing the OEM springs and shocks when you're done. And I'm not sure I want to drive a 2005+ Pathfinder with 5" lift unless I widen the stance a bit. I am looking at putting together my own lift using Rancho shocks, OME springs and Total Chaos UCA's. I'm hoping to get 2-2.5" lift plus gain 2" travel front and rear for about the same price as the Calmini kit. My goal is to mount 33" tires, which in combination with the lift will give me a total of 4-4.5" elevation, 2" extra clearance and 2" extra wheel travel. Link to comment Share on other sites More sharing options...
MIKEY14 Posted November 7, 2008 Share Posted November 7, 2008 I JUST INSTALLED THE NEW RANCHO QUICK LIFT SHOCKS FOR FRONT AND REAR WHICH GAVE ME 2" LIFT AND ALSO INSTALLED 285/75/16 BFG ALL-TERRAINS. LOOKS PRETTY SWEET. I HAD TO TRIM THE FENDER LINER SOME AND THE FRONT LOWER BUMPER VALANCE ON THE CORNER. BUT YOU CANT REALLY SEE IT. Link to comment Share on other sites More sharing options...
tekazgtr1984 Posted November 7, 2008 Share Posted November 7, 2008 I JUST INSTALLED THE NEW RANCHO QUICK LIFT SHOCKS FOR FRONT AND REAR WHICH GAVE ME 2" LIFT AND ALSO INSTALLED 285/75/16 BFG ALL-TERRAINS. LOOKS PRETTY SWEET. I HAD TO TRIM THE FENDER LINER SOME AND THE FRONT LOWER BUMPER VALANCE ON THE CORNER. BUT YOU CANT REALLY SEE IT. Post some pics dood! It sounds damn sexy Link to comment Share on other sites More sharing options...
MIKEY14 Posted November 7, 2008 Share Posted November 7, 2008 I JUST JOINED I SHOULD HAVE SOME PICS TOMORROW Link to comment Share on other sites More sharing options...
abomb1 Posted November 10, 2008 Share Posted November 10, 2008 I JUST INSTALLED THE NEW RANCHO QUICK LIFT SHOCKS FOR FRONT AND REAR WHICH GAVE ME 2" LIFT AND ALSO INSTALLED 285/75/16 BFG ALL-TERRAINS. LOOKS PRETTY SWEET. I HAD TO TRIM THE FENDER LINER SOME AND THE FRONT LOWER BUMPER VALANCE ON THE CORNER. BUT YOU CANT REALLY SEE IT. Got any more information on this lift? What else does it include besides shocks? How much $$$? Link to comment Share on other sites More sharing options...
medici Posted November 11, 2008 Share Posted November 11, 2008 Got any more information on this lift? What else does it include besides shocks? How much $$$? According to Rancho's documentation, you need the following parts for the Ranch lift: Two Rancho RS999790 QuickLift front coilover shocks at about $200-250 each. Two Rancho RS999312 RS9000XL rear shocks at about $100-125 each One pair Ranch RS70077 rear spacer blocks at about $65-90 per pair Optional: Rancho MyRide wireless shock adjustment controller to adjust shocks from inside your vehicle, if desired, at abround $250-300. Mikey: Did you gain any suspension travel? Have you done any off-roading since installing the kit?? Link to comment Share on other sites More sharing options...
MIKEY14 Posted November 11, 2008 Share Posted November 11, 2008 I just installed the kit 1 week ago. I hadnt had a chance to go offroad yet. I would say between the lift and my tires I gained about 3"s. As far as price medici is correct. I havent got the wireless remote yet, i just sent in the rebate for the free wireless i should see it in about 6 weeks. Ive been meaning to put pics on the sight hopefully soon. Link to comment Share on other sites More sharing options...
Earljam Posted November 12, 2008 Author Share Posted November 12, 2008 I just installed the kit 1 week ago. I hadnt had a chance to go offroad yet. I would say between the lift and my tires I gained about 3"s. As far as price medici is correct. I havent got the wireless remote yet, i just sent in the rebate for the free wireless i should see it in about 6 weeks. Ive been meaning to put pics on the sight hopefully soon. Link to comment Share on other sites More sharing options...
Earljam Posted November 12, 2008 Author Share Posted November 12, 2008 How/where did you get the rebate for Myride? Link to comment Share on other sites More sharing options...
MIKEY14 Posted November 13, 2008 Share Posted November 13, 2008 ITS TOO LATE NOW. YOU HAD TO BUY THE LIFT BEFORE 10/30/08 TO GET THE FREE MYRIDE. Link to comment Share on other sites More sharing options...
Earljam Posted November 13, 2008 Author Share Posted November 13, 2008 Mikey, Have you had an issues/difficulty with getting the alignment within factory spec after putting on your lift? I have read some other threads stating that this has been difficlut for some owners who went with the Old Man Emu lift. Link to comment Share on other sites More sharing options...
MIKEY14 Posted November 13, 2008 Share Posted November 13, 2008 NO NOT REALLY, IM WITHIN SPECS FROM LEFT TO RIGHT AND JUST .3 DEGREES BELOW CASTER. SO I MAY WANDER A LITTLE BIT AT HIGH SPEEDS. DRIVES GREAT. Link to comment Share on other sites More sharing options...
medici Posted November 20, 2008 Share Posted November 20, 2008 NO NOT REALLY, IM WITHIN SPECS FROM LEFT TO RIGHT AND JUST .3 DEGREES BELOW CASTER. SO I MAY WANDER A LITTLE BIT AT HIGH SPEEDS. DRIVES GREAT. :worthless: Come on, don't keep us in suspense! Pics of the install, if you have them, would be nice, too! Link to comment Share on other sites More sharing options...
vengeful Posted December 1, 2008 Share Posted December 1, 2008 NO NOT REALLY, IM WITHIN SPECS FROM LEFT TO RIGHT AND JUST .3 DEGREES BELOW CASTER. SO I MAY WANDER A LITTLE BIT AT HIGH SPEEDS. DRIVES GREAT. Why are you yelling? Link to comment Share on other sites More sharing options...
gmkelley Posted December 9, 2008 Share Posted December 9, 2008 Hello all. New to forum, first post. Thought i'd share the reply I got from ARB USA re OME on the 08 Pathfinder OR: I sent them an inquiry about the OME unit for my PF (minus shocks/struts: i planned to use the Bilsteins on my rig as they only have about 10k miles). I got a quick reply from Marc Bowers, Tech Supervisor which is quoted below. From ARB: "Standard OME springs will fit the truck, but US trucks seem to be lifting too tall resulting in alignment problems. My advisement is not to fit springs to these trucks for this reason unless they are carrying at least a couple hundred k.kilos in the back. Further, as the front uses struts I do not know if the springs will work on the Bilstein units as we've neither designed for them nor tested with them." I had read that folks were using their stock shocks/struts we good results (some topping out does rarely occur). Things might work better w/ the entire OMU setup? Guessing I'll find another 2" suspension lift elsewhere. best gk Link to comment Share on other sites More sharing options...
01silvapathy Posted December 11, 2008 Share Posted December 11, 2008 HAHA not to interrupt yalls conversation or anything but I was wandering around on 4x4parts the other day and noticed that there is a 3 inch body lift aviable through them. Just thought I might share Link to comment Share on other sites More sharing options...
skywhr Posted December 11, 2008 Share Posted December 11, 2008 HAHA not to interrupt yalls conversation or anything but I was wandering around on 4x4parts the other day and noticed that there is a 3 inch body lift aviable through them. Just thought I might share https://www.4x4parts.com/catalog/product_in...roducts_id=5496 Link to comment Share on other sites More sharing options...
Fukinitupagain Posted January 8, 2009 Share Posted January 8, 2009 Hey has anyone boght/installed the 5"Camini lift? Does anyone know what size tires you could run with that bitch? has anyone thought of going with the Calmini lift & the body lift? Link to comment Share on other sites More sharing options...
nocompromiseoffroad Posted January 8, 2009 Share Posted January 8, 2009 (edited) i just found this the other day and though some of you might like it http://www.prgproducts.com/shop/product/pr...inder_mini_kit/ i havn't ordered my kit yet but will be soon. does anyone know will a is there any bumpers that will fit a pathfinder Edited January 8, 2009 by nocompromiseoffroad Link to comment Share on other sites More sharing options...
Fukinitupagain Posted January 8, 2009 Share Posted January 8, 2009 does anyone know will a is there any bumpers that will fit a pathfinder Here ya go: Bumper Link Link to comment Share on other sites More sharing options...
nocompromiseoffroad Posted January 9, 2009 Share Posted January 9, 2009 thanks alot! Link to comment Share on other sites More sharing options...
Fukinitupagain Posted January 11, 2009 Share Posted January 11, 2009 (edited) thanks alot! Welcome. Hey you aint too far from me (High Point, NC), you wanna go to URE sometime when it opens back up again in the spring? Edited January 12, 2009 by Fukinitupagain Link to comment Share on other sites More sharing options...
nocompromiseoffroad Posted January 13, 2009 Share Posted January 13, 2009 Welcome. Hey you aint too far from me (High Point, NC), you wanna go to URE sometime when it opens back up again in the spring? i will be out at URE quite a bit, but this pathy wont be there for a while. i sold my rig this past year but often catch a ride with my buddies. if you want to trail ride with some jeeps and yotas then we should get up. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now