Timing Cover Help?

[BeetleBailey]

First let me start by saying thank you all for a great sight. I just did a TB and WP replacement on my 88SE. But I think I might have put the covers on wrong. If someone might have a detailed picture of how they go, it would be very helpful. Thank you, Bailey.

[unccpathfinder]

it should go on one way. I think the top one over laps the bottom but I could have that backwards...but it should only go on 1 way

[Simon]

You're right about that UNCC. They only go one way, and the top overlaps the bottom.

[BeetleBailey]

Thanks guys. But I need to know where the secondary washer goes at the HB. Sorry for not being more specific. Thanks again, Bailey.

[Simon]

There's the crankshaft pulley, a washer, the timing cover, harmonic balancer, and then the washer, and bolt in that order. The washer that goes against the crankshaft pulley is the thin metal one.

[BeetleBailey]

There's the crankshaft pulley, a washer, the timing cover, harmonic balancer, and then the washer, and bolt in that order. The washer that goes against the crankshaft pulley is the thin metal one.

THANKS!!!! I knew I put it together wrong. Now to tear it back apart and redo it. Bailey